I'm a long time user of WSJT-X with my TS-590S. I'm also familiar with setting 
up WSJT-X to use Commander, or OmniRig, or for a direct connection to the 
TS-590.

I have attempted to set up WSJT-X with N1MM but have a problem with rig keying 
mode. When I press "Tune" - the rig is keyed, Windows shows audio output, but 
there is no power output. This is almost certainly an indication that N1MM / 
WSJT-X is sending TX0 instead of TX1.

When integrated with N1MM the instructions say WSJT-X should be configured for 
rig - DX Lab Commander. Both DXLab Commander and WSJT-X have the option to 
control which keying command is used ( Commander = data transmission from USB 
interface or ANI interface / WSJT-X = transmit audio source). Where is the 
equivalent keying command selection when WSJT-X is pretending to use Commander 
but Commander is not actually in use?

If anyone knows would you please point me to the menu setting, preferably with 
a screen shot.

Thanks and 73,
Andy, k3wyc
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to