Black Michael via wsjt-devel kirjoitti 18.12.2019 klo 0.47:
Band change seems to work all the time but externally changing
frequencies (from Log4OM) seems to cause this situation sometimes.
de Mike W9MDB
Hi!
Looks like a collision when 2 programs tries to access same rig port.
Start a rigctld instance from start script or cron with ic7300 parameters.
Then use "hamlib net rigctl" at localhost:4532 with wsjtx and for all
the other programs needing rig. ( Also called rig model 2 {rigctld -m2}).
That way all programs poll the rigctld instance started at beginning and
only that alone polls the rig.
No collisions and you can run all your programs one by one, or all at
same time. Everything works.
And when you change your rig model you just change settings of rigctld
started by script. No need to touch any program's setups.
I never have found any problems with my ic7300 (fingers crossed) with
wsjtx, cqrlog, qsstv, fldigi, grig. Only in low bands, 7mhz and below,
seldom rig connect disappears, but that is known RFI issue even when
having ferrites at both ends of USB cable and groundings as good as they
can be in this qth.
--
Saku
OH1KH
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
