Hi, >> This makes sense. The calling station heard you where you are. He may not >> hear you if you move.
Do not know, what the other really was doing - but think follow situation is happen: I think the other station are making CQ calling, without activation of "Call 1st". After End of watchdog their TX do not send anymore. I am moving to another one, those station recognize a little later on that there was an answer - and manually activate the sequence. If I activate the sequence by double click on the answer to me they definitely not recognize my on the "wrong" frequency. I have to go to their frequency, where they are calling. And special those is, what I forget quite often in those situation. To change the Tx frequency also ☹ 73, Roland - DK4RH -----Ursprüngliche Nachricht----- Von: Jim Shorney <jshor...@inebraska.com> Gesendet: Samstag, 30. Mai 2020 17:05 An: wsjt-devel@lists.sourceforge.net Betreff: Re: [wsjt-devel] FT8: Double Click on entry in Rx Frequency only set the own Rx frequency This makes sense. The calling station heard you where you are. He may not hear you if you move. 73 -Jim NU0C On Sat, 30 May 2020 15:53:18 +0200 <roland.hartm...@web.de> wrote: > After testing a little bit I recognize: If I do an double click in Rx > Frequency on an entry where I was named as receiver - than only the Rx > Frequency is changed. In all other cases where I was not named as receiver Rx > and Tx frequency are changed. > > 73, Roland - DK4RH _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
