That seems to have sorted it, many thanks.
Could I suggest publishing something along those lines with the new GA
release, and so avoid potentially loads of questions from others who
might be in the same situation?
Alan G0TLK
On 31/05/2020 12:00, Bill Somerville wrote:
On 31/05/2020 09:59, Alan Groups wrote:
I've been playing with RC01 to 03 on FT8 at HF - plenty of decodes,
certainly many more than 2.1.2, but I haven't worked that many CQ's -
they didn't respond.
My impression is that using 2.1.2 I was able to get more completed
contacts in the same testing sessions.
Timing is Meinberg controlled, and rig settings etc haven't changed.
Not sure what's going on here, and it could of course be conditions,
luck, or my transmit performance is down due to dry ground (we have
had sunny WX with almost no rain for over a month and my antenna is
end fed against ground), but I also wonder if the more sensitive RC03
decoder is maybe showing stations that then cannot hear me when I
reply without the more sensitive decoder their end? (ie reciprocity)
I'll see if I can do some more structured testing but wonder if
anyone else is seeing similar differences please?
Alan G0TLK
Hi Alan,
if you have switched from v2.1.2 32-bit on Windows then you need to do
a one-off Tx audio level set up. See this old post for a recipe:
https://groups.io/g/WSJTX/message/5077
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
