Hi all. Installed 2.2.0 GA and having none of the CAT issues with my FT 857D and Mac Catalina described by other Yaesu owners…Thanks for great software…73 Gary KO3F
> On Jun 2, 2020, at 5:54 PM, Stephen VK3SIR <[email protected]> wrote: > > Update: Windows 10: Scratch the FT-897D with CT-17 off the non-operational > list as I now have it functioning with this hardware and is stable. When > started with a fresh wsjtx.ini all works! > > The fresh wsjtx.ini does not work with the FT-991 though L > > From: Stephen VK3SIR <[email protected]> > Sent: Wednesday, 3 June 2020 10:34 AM > To: WSJT software development <[email protected]> > Subject: Re: [wsjt-devel] Hamlib error with GA release > > Folks, > > I am observing the same issue on Windows 10 (pre 2001 release) with the > FT-991 here but also on a FT-897D using a CT-17. > > I have also noted the same issues in the RC versions using Ubuntu 20.04 on > old Intel Apple Hardware with the FT-897D and CT-17. Again this is old > hardware with new OS – so has not been reported until now. (No ACK of command > errors recorded). The FT-991 is not tested on Ubuntu yet ! > > Previous releases work. Issue appears at this stage to be Hamlib related. > > 73 > > Steve I > VK3VM / VK3SIR > > From: DG2YCB, Uwe <[email protected] <mailto:[email protected]>> > Sent: Wednesday, 3 June 2020 6:59 AM > To: 'WSJT software development' <[email protected] > <mailto:[email protected]>> > Subject: Re: [wsjt-devel] Hamlib error with GA release > > Hi Bill, > > Done. See file enclosed. FYI: During the test, I clicked two times on the > Test CAT button. Each times the error message popped up. > > 73 de Uwe, DG2YCB > > Von: Bill Somerville [mailto:[email protected] > <mailto:[email protected]>] > Gesendet: Dienstag, 2. Juni 2020 22:24 > An: [email protected] <mailto:[email protected]> > Betreff: Re: [wsjt-devel] Hamlib error with GA release > > Hi Uwe, > > and again please with an 'f' and a 'q' with spaces between after the last > command line switch. > > 73 > Bill > G4WJS. > > On 02/06/2020 21:17, DG2YCB, Uwe wrote: > Yes, sorry! Here it comes again with 38400… > And a screen shot of that test. > > <image001.png> > > 73 de Uwe, DG2YCB > > Von: Bill Somerville [mailto:[email protected] > <mailto:[email protected]>] > Gesendet: Dienstag, 2. Juni 2020 22:09 > An: [email protected] <mailto:[email protected]> > Betreff: Re: [wsjt-devel] Hamlib error with GA release > > Uwe, > > you need to run the last test again with the right baud rate! > > 73 > Bill > G4WJS. > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
