Hi, I've just checked my Kenwood:
* Turned the rig on and changed the frequency from that last used with
WSJT-X 2.2.1
* Turned rig off at it's power button but leaving PSU on
* Started WSJT-X 2.2.1
* Rig turned on and WSJT-X changed to the new frequency, rig beeped
* Closed WSJT-X, rig stayed on
* Turned rig off at it's power button but leaving PSU on
* Started WSJT-X 2.2.1
* Rig turned on, no change in frequency and no beep
Alan G0TLK
On 09/06/2020 00:39, Al Pawlowski wrote:
No. That box is unchecked in my setup.
Al Pawlowski, K6AVP
Los Osos, CA USA
On Jun 8, 2020, at 16:31, [email protected]
<mailto:[email protected]> wrote:
Do you have "Monitor returns to last used frequency" turned on?
That will cause the rig to wake up as it has to get the frequency.
Mike W9MDB
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
