MicroKEYER III here (uses the same Router Software as MK II)
works perfect, by using:
COM14: JTDX
COM15: WSJT-X
or
COM14: WSJT-X or JTDX
COM15: Flrig
or, a little bit strange, but
COM14: WSJT-X or JTDX
COM15: fldigi 4.1.09.20 with RigCAT
If COM14 or COM15 makes a change in frequency, the other will follow.
TX or Tune works too at COM14 or COM15 port - just as you would like it.
73's de OE1MWW
Wolfgang
Thursday, June 11, 2020, 2:05:58 PM, you wrote:
| Reading the documentation it's implied and refers to a "control channel". The thing just does a passthru so I don't know how it could possibly share the rig with CAT control. That's likely why he got a bus collision error. I also can't find a single youtube video of anybody doing CAT control using two programs. The 2nd cat port is just for monitoring. Unless I'm reading the wrong documentation. Nowhere in the docs does it say you can have two CAT control channels. If it did they'd be bragging about it for sure. They just don't explicitly state the limitation (should be obvious to the casual user I'm sure :-) From https://www.microham.com/Downloads/U2_English_Manual.pdf for example: The virtual COM port assigned for Control can be shared with CW and/or PTT but sharing must be specifically supported by the application. Many applications do not know how to share the radio port with other functions, use the control lines (RTS, CTS, DTR, DSR) for handshaking, or apply a fixed level. Mike On Thursday, June 11, 2020, 06:43:56 AM CDT, Bill Somerville <[email protected]> wrote: On 11/06/2020 12:36, Black Michael via wsjt-devel wrote: > You can't have two programs doing CAT control to the MKII at the same > time. > Mike, that's not correct. The microHAM uRouter provides two sets of COM ports per radio. 73 Bill G4WJS. _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel |
73 de Wolfgang
OE1MWW
----------
under construction: https://www.oe1mww.work/
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
