I have done this before for a long time with a FT-1000MP, and I have never had any problems. At this particular club we also have a station no. 2, with a Yaesu FT-1000 Mark V, and the combo WSJT-X in one of the CAT ports from Microham router and N1MM+ on the other works, even the Mark V is not listed in WSJT-X choice of radios. I use FT-1000MP, and that works, as far as I can see. So it still is a FTdx3000 problem. But as I stated earlier, Im not computer savvy enough to understand why.
Latest: I happened, by coincidence, to start WSJT-X first, and then N1MM+, today's update, and then it worked! I checked, starting N1MM+ first, then WSJT-X provokes the Hamlib error again. 73 de Tom OH6VDA > 11. jun. 2020 kl. 15:50 skrev Bill Somerville <[email protected]>: > > > Mike, > > the microHAM uRouter application provides two sets of virtual serial ports > per rig. I have been using this facility with issues for many Years. Proper > arbitration of CAT commands is provided. Obviously conflicting commands > cannot be reconciled, but control from two applications is reasonable and > practical using this application with devices like the micro KEYER 2 and 2R+. > > 73 > Bill > G4WJS. > > On 11/06/2020 13:05, Black Michael via wsjt-devel wrote: >> Reading the documentation it's implied and refers to a "control channel". >> The thing just does a passthru so I don't know how it could possibly share >> the rig with CAT control. That's likely why he got a bus collision error. >> I also can't find a single youtube video of anybody doing CAT control using >> two programs. The 2nd cat port is just for monitoring. >> >> Unless I'm reading the wrong documentation. Nowhere in the docs does it say >> you can have two CAT control channels. If it did they'd be bragging about >> it for sure. They just don't explicitly state the limitation (should be >> obvious to the casual user I'm sure :-) >> >> From https://www.microham.com/Downloads/U2_English_Manual.pdf for example: >> >> The virtual COM port assigned for Control can be shared with CW and/or PTT >> but sharing must be specifically supported by the application. Many >> applications do not know how to share the radio port with other functions, >> use the control lines (RTS, CTS, DTR, DSR) for handshaking, or apply a fixed >> level. >> >> >> Mike >> >> >> >> On Thursday, June 11, 2020, 06:43:56 AM CDT, Bill Somerville >> <[email protected]> wrote: >> >> >> On 11/06/2020 12:36, Black Michael via wsjt-devel wrote: >> > You can't have two programs doing CAT control to the MKII at the same >> > time. >> > >> Mike, >> >> that's not correct. The microHAM uRouter provides two sets of COM ports >> per radio. >> >> >> 73 >> Bill >> G4WJS. >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
