On 17/07/2020 15:11, Martin Davies G0HDB wrote:
On 17 Jul 2020 at 14:38, Bill Somerville wrote:
Hi Martin,
is there an easy way to disconnect the hard wired PTT from your
interface, for a test? I ask because it seems like the IC-7610 appears
to be doing something odd when keyed both via a CAT command and via the
ACC socket.
Hi Bill, yes I did wonder if there was some sort of weird conflict between what
the CAT data
was telling the 7610 to do and what was happening on the PTT/SEND input on the
ACC1
socket.
I've got a sort of break-out connector that goes in-line between the DIN plug
on the end of the
cable coming from the G4ZLP interface unit and the ACC1 socket so I'll see if I
can dig out
the break-out connector and then disconnect the PTT line, and then repeat the
tests with only
CAT controlling PTT to see what happens.
--
73, Martin G0HDB
Hi Martin,
thanks, that will be helpful. It would not be the first rig that doesn't
correctly apply "OR" logic to multiple sources of PTT.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
