On 22/07/2020 00:18, Russell Nieser wrote:
Mike,
First, I realize the TS-480 is not on your list.
I operate a TS-480SAT with Raspberry Pi 4B 2G, WSJT-x v2.2.2 and
CQRlog 2.3.0. It works fine with Settings: Radio Kenwood TS-4480, CAT
Control Serial Port /dev/tty/USB0, Baud 9600, PTT CAT, etc.
Previously, I operated the same HW with WSJT-x 2.0.0 and CQRlog 2.3.0
with Radio Hamlib Net rigctl, CAT Control 127.0.0.1:4532, CAT Control etc.
I I added to /etc/rc.local at end before exit 0, the following:
=!/bin/bash
/usr/bin/rigctld -m 228 -r
/dev/serial/by-id/usb-RT_Systems_CT63_Radio-Cable_RT2HJGF8-if00-port0
-s 9600 &
This worked fine and allowed the CRQlog program to sample the TS-480
frequency for display. However I can't get this Hamlib Net rigctl to
work with WSJT-x v2.2.2.
Any explanations and/or suggestions would be greatly appreciated. Let
me know if additional info is needed.
73
Russ KG4IIC
Russ,
the Hamlib rig model numbers have been changed to allow room for
expansion. Use `/usr/local/bin/rigctl-wsjtx -l` to list the model
numbers. I have assumed you have installed WSJT-X and associated
utilities in the default location of /usr/local.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
