Hi Rich, Here is what I would reply with. Hi Bill, I populated the Band drop down with a HF band such as 20M, then switched to MSK144, neither the band or rig changed.However, I then selected the 6M band while in MSK144, WSJT-X promptly select the 6M and changed the rig to 6M.If I then attempt to change to 2M, WSJT-X attempts to change the rig to 2M, but reverts back to 6M when it detects that the radio returns with the 6M frequency. I believe that at the vary least, WSJ-X should issue the CAT command to change to that band and let HamLib take care of the rest. At worst, you are no worse then before and the companion programs that are monitoring the UDP traffic would at least get appropriate UDP Status traffic. 73,
Sam W2JDB -----Original Message----- From: Rich Zwirko - K1HTV <k1...@comcast.net> To: WSJT <wsjt-devel@lists.sourceforge.net> Sent: Tue, Sep 1, 2020 4:25 pm Subject: [wsjt-devel] Bug when using MSK144? In the latest version of the QLog program, written so blind hams can use the WSJT-X digital modes, the MSK144 mode was added. When testing MSK144 I discovered that when the MSK144 mode was selected while the radio was still on any HF band, instead of switching to one of the MSK144 VHF/UHF frequencies, the radio remained on the same HF band that my K3 was set to before the mode switch was made. This means that if the user accidentally called CQ, the transmission would be made on an HF band, where the MSK144 is not legal, in many countries. What should happen is that when the MSK144 mode is selected, the band box should switch to the lowest frequency on the VHF/UHF pulldown menu list and CAT control should switch the radio to that frequency. I hope that this issue can be resolved in the next release of WSJT-X. Thanks. 73,Rich - K1HTV PSIf you know of any blind or visually impaired Hams who you want to help get started in the world of FT8, FT4 and MSK144, send an email to:mailto:qlogusers%252bsubscr...@groups.io to join the QLog Users Group. In the "Files" section are the QLog.exe program, the Initial Setup Manual for sighted helpers, the QLog Users Manual as well as other support files and programs. _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
