Hi Bill,
I am currently helping a blind user setting up wsjt-x in the UK.
Will get back as soon as I finish.
73,
Sam W2JDB
-----Original Message-----
From: Bill Somerville <g4...@classdesign.com>
To: wsjt-devel@lists.sourceforge.net
Sent: Wed, Sep 2, 2020 10:17 am
Subject: Re: [wsjt-devel] Bug when using MSK144?
Hi Sam,
I am unable to reproduce that behaviour. Here's the output from the
udp_daemon tool from your first scenario:
C:\build>\test-install\wsjtx-dev\Release64\bin\udp_daemon.exe -g 239.255.0.1
Discovered WSJT-X instance: WSJT-X - test v2.3.0-devel (fcc5df)
WSJT-X - test: Dial frequency changed to 3574000
WSJT-X - test: Mode changed to MSK144
WSJT-X - test: Dial frequency changed to 50260000
WSJT-X - test: Mode changed to FT8
WSJT-X - test: Dial frequency changed to 50313000
WSJT-X - test: Dial frequency changed to 1840000
WSJT-X - test: Mode changed to MSK144
Continuing with your second scenario I see: Removed WSJT-X instance: WSJT-X
- test
Discovered WSJT-X instance: WSJT-X - test v2.3.0-devel (fcc5df)
WSJT-X - test: Mode changed to JT9A
WSJT-X - test: Mode changed to MSK144
WSJT-X - test: Dial frequency changed to 1840000
WSJT-X - test: Dial frequency changed to 145000000
WSJT-X - test: Dial frequency changed to 1840000
WSJT-X - test: Mode changed to FT8
WSJT-X - test: Dial frequency changed to 3573000
WSJT-X - test: Mode changed to MSK144
All the mode and frequency changes are faithfully reported by UDP status
messages.
73
Bill
G4WJS.
On 02/09/2020 14:51, Sam W2JDB via wsjt-devel wrote:
Hi Bill,
I have updated and tested my program and I can programmatically change the
value in the band box to 50.260 and thereby have WSJT-X issue the CAT command
to the radio and switch to the correct frequency.
However, I ran into a problem where if I then switch back to FT8, drop down
to a low HF band and then switch again to MSK144, there is no indication being
given through UDP status message that the mode was changed. If I then shutdown
WSJT-X while still in MSK144, then start it back up, switch to FT8 move to a
lower HF band and then switch back to MSK144, there is no UDP Traffic
indicating a mode change. If on the other hand, I switch to FT8 and to a lower
HF Band, before shutting down WSJT-X, start it up again, switch to MSK144, I do
received the UDP Status message indicating a mode change. It seems that the
mode change indication happens only once if you are not on the appropriate
MSK144 frequency. Anyway, I hope this information helps.
73,
Sam W2JDB
-----Original Message-----
From: Sam W2JDB via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net
To: wsjt-devel@lists.sourceforge.net mailto:wsjt-devel@lists.sourceforge.net
Cc: Sam W2JDB mailto:w2...@aol.com
Sent: Wed, Sep 2, 2020 7:43 am
Subject: Re: [wsjt-devel] Bug when using MSK144?
Hi Bill,
Thank you very much for this thoughtful explanation regarding band changes in
WSJT-X. As I mentioned, I instructed Rich to update their document to change to
6M before selecting MSK144. I will update my program so that if it detects a
frequency lower than 6M, my program will update the frequency box.50.260
Thanks again.
73,
Sam W2JDB
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
