Hi Yoshi san,
that is because you have no CAT controlled rig. The alternative is to
start at the current VFO frequency of the rig which is not possible
without CAT control.
73
Bill
G4WJS.
On 22/11/2020 00:34, Yoshi,I wrote:
Hi Bill
"Settings->General->Monitor returns to last used frequency".
My system was gray out. I can't check mark.
Settings-> General-> Monitor returns to last used frequency on other PCs can be
checked normally.
Only laptops can't be checked.
It may be a laptop setting, so I'll investigate it a little more.
use system
WSJT-X2.3.0 rc2 (64bit)
Windows 10
CPU Core 2Duo 2.4GHz 64bit
RAM 4G.
(Thinkpad X61)
73 and Thanks.
-- de JH8XVH Yoshi On Sat, 21 Nov 2020 22:04:08 +0000 Bill Somerville
<g4...@classdesign.com> Write:
Hi Peter,
switching configurations is equivalent to initial startup, it depends on the option
"Settings->General->Monitor returns to last used frequency".
73
Bill
G4WJS.
On 21/11/2020 20:16, Peter Sumner wrote:
Hello Bill,
?does your explanation?of behavior hold for when the mode is changed > via the selection of a
different configuration?? In my experience?the > correct frequency is never selected when I
change to a different > configuration,? I have multiple configurations with matching modes for
> both my HF and VHF rigs, selecting a different configuration always > leaves the rig at
the previously used frequency, is this expected > behavior?
WSJT-X v2.30-RC2 and WSJT-X v2.21
Regards,
Peter vk5pj
WSJT-X will select the lowest frequency on the current band (or
new band
if selecting a band) for the current mode (or new mode if changing
mode). The lowest frequency is the lowest one that is specified in
"Settings->Frequencies->Working Frequencies" that has a matching
band,
mode if specified, and IARU Region that matches the one set in
"Settings->General". Have you set your IARU Region in "Settings
General"? If not then IARU Region filtering of frequencies will
not be done.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
