Hi all,
have the same problem.
If i start the radio in USB mode, manually i change with a button on
the radio IC706mk2 mode to CW, then i go back into WSJT-X i
chose a freq from the dropdown menu list, radio is trying to switch to
that selected frequency but can't do it.
Already spoke with Michael about that problem but so far no results.
All Hamlib versions after 12.12.2020 or so have something wrong with
IC706mk2 settings. (Using also JTDX - same problem). Echo is disabled
in the radio menu, speed is set to 4800.
debug.txt in the attachment
Best regards,
73 Patrik 9A5CW
On Wed, Jan 6, 2021 at 9:27 PM Christoph Berg <[email protected]
<mailto:[email protected]>> wrote:
Re: Black Michael via wsjt-devel
> So if you do an "ldd" on the executables they all point to the
same libhamlib ?
$ ldd /usr/bin/wsjtx | grep hamlib
libhamlib.so.4 => /lib/x86_64-linux-gnu/libhamlib.so.4
(0x00007f556f2a0000)
$ ldd /usr/bin/rigctl* | grep hamlib
libhamlib.so.4 => /lib/x86_64-linux-gnu/libhamlib.so.4
(0x00007f54323ba000)
libhamlib.so.4 => /lib/x86_64-linux-gnu/libhamlib.so.4
(0x00007f348d105000)
libhamlib.so.4 => /lib/x86_64-linux-gnu/libhamlib.so.4
(0x00007ffa08c89000)
> If that's true please provide some debug info from rigctld so we
can see the problem. What I suspect you'll see is it's asking for
"VFO_SUB" which is the behavior we've seen with the
problem....that's the common problem with the structure realignment.
$ /usr/bin/rigctld -m 3009 -r /dev/ttyUSBICOM -p /dev/ttyUSBPTT -vvvvv
Recommend using --vfo switch for rigctld if client supports it
rigctl and netrigctl will automatically detect vfo mode
rigctld Hamlib 4.0
Last commit was Sa Jan 02 00:47:50 2021 +0000 SHA=5f4cc3
Report bugs to <[email protected]
<mailto:[email protected]>>
rig_init called
initrigs4_icom: _init called
rig_register called
rig_register: rig_register (3055)
rig_register called
rig_register: rig_register (3085)
rig_register called
rig_register: rig_register (3009)
rig_register called
rig_register: rig_register (3010)
rig_register called
[...]
rig_register called
rig_register: rig_register (3076)
icom_init called
icom_init: done
main: twiddle=0, uplink=0
rig_open called
port_open called
serial_open called
serial_setup called
serial_setup: tcgetattr
serial_setup: cfmakeraw
serial_setup: cfsetispeed=19200,0x000e
serial_setup: cfsetospeed=19200,0x000e
serial_setup: data_bits=8
serial_setup: parity=0
serial_setup: tcsetattr TCSANOW
serial_flush called
tcflush
icom_rig_open 757
icom_rig_open: IC-706 v20201219.0
icom_get_usb_echo_off called
icom_get_usb_echo_off: retry temp set to 1
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0,
data_len=80
rig_flush: called for serial device
serial_flush called
tcflush
write_block called
write_block(): TX 6 bytes
0000 fe fe 48 e0 03 fd ..H...
read_string called, rxmax=80
read_string(): RX 6 characters
0000 fe fe 48 e0 03 fd ..H...
read_string called, rxmax=80
read_string(): RX 11 characters
0000 fe fe e0 48 03 00 70 35 05 00 fd ...H..p5...
icom_get_usb_echo_off: ack_len=6
icom_get_usb_echo_off: USB echo on detected
rig_get_vfo called
rig_get_vfo: no get_vfo
rig_open: Icom rig so default vfo = currVFO
Opened rig model 3009, 'IC-706'
Backend version: 20201219.0, Status: Stable
main: Using IPV4
... clicking on "Test CAT" in wsjtx 2.3.0~rc3:
Connection opened from localhost:54898
sync_callback: client lock engaged
sync_callback: client lock disengaged
handle_socket: vfo_mode=0
rigctl_parse: called, interactive=1
rigctl_parse: cmd=\(5c)
rigctl_parse: cmd=chk_vfo
rigctl_parse: vfo_opt=0
rigctl_parse: debug1
rigctl_parse: debug5
rigctl_parse: debug10
sync_callback: client lock engaged
rigctl(d): ð 'currVFO' '' '' ''
rigctl_parse: vfo_opt=0
rigctl_parse: vfo_opt=0
rigctl_parse: retcode=0
sync_callback: client lock disengaged
handle_socket: vfo_mode=0
rigctl_parse: called, interactive=1
rigctl_parse: cmd=\(5c)
rigctl_parse: cmd=dump_state
rigctl_parse: vfo_opt=0
rigctl_parse: debug1
rigctl_parse: debug5
rigctl_parse: debug10
sync_callback: client lock engaged
rigctl(d): 'currVFO' '' '' ''
rigctl_parse: vfo_opt=0
rigctl_parse: vfo_opt=0
rigctl_parse: retcode=0
sync_callback: client lock disengaged
handle_socket: vfo_mode=0
rigctl_parse: called, interactive=1
rigctl_parse: cmd=v(76)
rigctl_parse: cmd==0x76
rigctl_parse: vfo_opt=0
rigctl_parse: debug1
rigctl_parse: debug5
rigctl_parse: debug10
sync_callback: client lock engaged
rigctl(d): v 'currVFO' '' '' ''
rigctl_parse: vfo_opt=0
rig_get_vfo called
rig_get_vfo: no get_vfo
rigctl_parse: vfo_opt=0
rigctl_parse: return#1 RPRT -11
rigctl_parse: retcode=-11
sync_callback: client lock disengaged
handle_socket: rigctl_parse retcode=-11
handle_socket: vfo_mode=0
rigctl_parse: called, interactive=1
rigctl_parse: cmd==0x0a
rigctl_parse: cmd=v(76)
rigctl_parse: cmd==0x76
rigctl_parse: vfo_opt=0
rigctl_parse: debug1
rigctl_parse: debug5
rigctl_parse: debug10
sync_callback: client lock engaged
rigctl(d): v 'currVFO' '' '' ''
rigctl_parse: vfo_opt=0
rig_get_vfo called
rig_get_vfo: no get_vfo
rigctl_parse: vfo_opt=0
rigctl_parse: return#1 RPRT -11
rigctl_parse: retcode=-11
sync_callback: client lock disengaged
handle_socket: rigctl_parse retcode=-11
handle_socket: vfo_mode=0
rigctl_parse: called, interactive=1
rigctl_parse: cmd==0x0a
rigctl_parse: cmd=f(66)
rigctl_parse: cmd==0x66
rigctl_parse: vfo_opt=0
rigctl_parse: debug1
rigctl_parse: debug5
rigctl_parse: debug10
sync_callback: client lock engaged
rigctl(d): f 'currVFO' '' '' ''
rigctl_parse: vfo_opt=0
rig_get_freq called vfo=currVFO
vfo_fixup: vfo=currVFO
vfo_fixup: Leaving currVFO alone
get_cache_freq: vfo=currVFO, freq=0
elapsed_ms: start = 0,0
rig_get_freq: cache check age=1000000ms
rig_get_freq: cache miss age=1000000ms, cached_vfo=None,
asked_vfo=currVFO
icom_get_freq called for currVFO, curr_vfo=currVFO
set_vfo_curr: vfo=currVFO, curr_vfo=currVFO
set_vfo_curr: Asking for currVFO, currVFO=currVFO
set_vfo_curr: using curr_vfo=currVFO
set_vfo_curr: curr_vfo now=currVFO
icom_get_freq: using vfo=currVFO
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0,
data_len=1485719584
rig_flush: called for serial device
serial_flush called
tcflush
write_block called
write_block(): TX 6 bytes
0000 fe fe 48 e0 03 fd ..H...
read_string called, rxmax=80
read_string(): RX 6 characters
0000 fe fe 48 e0 03 fd ..H...
read_string called, rxmax=80
read_string(): RX 11 characters
0000 fe fe e0 48 03 00 70 35 05 00 fd ...H..p5...
from_bcd called
icom_get_freq exit vfo=currVFO, curr_vfo=currVFO
elapsed_ms: start = 0,0
elapsed_ms: after gettime, start = 1609964100,803773113
elapsed_ms: start = 0,0
elapsed_ms: after gettime, start = 1609964100,803796357
rig_get_freq: cache reset age=999000ms, vfo=currVFO, freq=5357000
elapsed_ms: start = 0,0
elapsed_ms: after gettime, start = 1609964100,803841719
rigctl_parse: vfo_opt=0
rigctl_parse: retcode=0
sync_callback: client lock disengaged
handle_socket: vfo_mode=0
rigctl_parse: called, interactive=1
rigctl_parse: cmd==0x0a
rigctl_parse: cmd=m(6d)
rigctl_parse: cmd==0x6d
rigctl_parse: vfo_opt=0
rigctl_parse: debug1
rigctl_parse: debug5
rigctl_parse: debug10
sync_callback: client lock engaged
rigctl(d): m 'currVFO' '' '' ''
rigctl_parse: vfo_opt=0
rig_get_mode called
elapsed_ms: start = 0,0
rig_get_mode: cache check age=1000000ms
rig_get_mode: cache miss age=1000000ms
icom_get_mode called vfo=currVFO
icom_transaction: cmd=0x04, subcmd=0xffffffff, payload_len=0,
data_len=0
rig_flush: called for serial device
serial_flush called
tcflush
write_block called
write_block(): TX 6 bytes
0000 fe fe 48 e0 04 fd ..H...
read_string called, rxmax=80
read_string(): RX 6 characters
0000 fe fe 48 e0 04 fd ..H...
read_string called, rxmax=80
read_string(): RX 8 characters
0000 fe fe e0 48 04 01 01 fd ...H....
icom_get_mode: modebuf[0]=0x04, modebuf[1]=0x01, modebuf[2]=0x01,
mode_len=3, filter=1
icom2rig_mode: mode=0x01, pd=1
rig_passband_wide called
rig_passband_narrow called
icom_get_dsp_flt called
icom_transaction: cmd=0x1a, subcmd=0x03, payload_len=0, data_len=0
rig_flush: called for serial device
serial_flush called
tcflush
write_block called
write_block(): TX 7 bytes
0000 fe fe 48 e0 1a 03 fd ..H....
read_string called, rxmax=80
read_string(): RX 7 characters
0000 fe fe 48 e0 1a 03 fd ..H....
read_string called, rxmax=80
read_string(): RX 6 characters
0000 fe fe e0 48 fa fd ...H..
icom_transaction: failed: Command rejected by the rig
icom_get_mode: vfo=currVFO returning mode=USB, width not available
rig_get_mode: retcode after get_mode=0
rig_get_mode(1894): debug
rig_get_mode(1901): debug
rig_passband_normal called
rig_passband_normal: return filter#0, width=2400
elapsed_ms: start = 0,0
elapsed_ms: after gettime, start = 1609964100,845259727
rigctl_parse: vfo_opt=0
rigctl_parse: retcode=0
sync_callback: client lock disengaged
handle_socket: vfo_mode=0
rigctl_parse: called, interactive=1
rigctl_parse: cmd==0x0a
rigctl_parse: cmd=q(71)
rigctl_parse: cmd==0x71
rigctl_parse: vfo_opt=0
rigctl_parse: quit returning NETRIGCTL_RET 0
handle_socket: rigctl_parse retcode=1
Connection closed from localhost:54898
... and the "Hamlib error: Invalid parameter while exchanging
VFOs" popup.
Perhaps one detail about the 3.3 hamlib used before, it had a small
vfo_ops patch to support the IC706, but I believe that was the same
that went into 4.0. Possibly the error is in that area:
https://salsa.debian.org/debian-hamradio-team/hamlib/-/commit/695c71fd71205857d0ef84daf8d09c7eaa6bff5d
<https://salsa.debian.org/debian-hamradio-team/hamlib/-/commit/695c71fd71205857d0ef84daf8d09c7eaa6bff5d>
Thanks,
Christoph DF7CB
_______________________________________________
wsjt-devel mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
<https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
--
9A5CW - Patrik Hrvatin
