On 07/01/2021 20:13, Christoph Berg wrote:
Re: Patrick 9A5CW
have the same problem.
If i start the radio in USB mode, manually i change with a button on the
radio IC706mk2 mode to CW, then i go back into WSJT-X i
chose a freq from the dropdown menu list, radio is trying to switch to that
selected frequency but can't do it.
I have the same problem here. If IC706 is in CW mode, wsjtx fails to
change the mode, and will even refuse to key PTT via the attached
usb-serial dongle. Changing bands via wsjtx works somewhat, but the
rig stays on CW, and the dreaded "Rig Control Error" popup appears.
Log of "Test CAT" and the failing "Test PTT" attached. (IC706 directly
attached without rigctld.)
Christoph
Hi Christoph,
this is a known issue with Hamlib 4.0, it is not able to set the rig
mode for some of the older Icom rigs. You can work around it in WSJT-X
by checking "Settings->Radio->Mode->None". The issue is fixed in the
Hamlib master branch by commit 02c08544.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
