A couple of complaints from those who were using a single instance were having
problems with the constant open/close of the serial port.So it was changed to
support the simple case and those that want the more complex case of multiple
apps have to use the additional file as WSJT-X authors have decided to not
include any options in the rig control user interface.
I'm looking at the sharing now to see if there is a problem going on.
Mike W9MDB
On Monday, February 15, 2021, 10:33:13 PM CST, Alex Artieda, HB9DRI
<[email protected]> wrote:
Hello Bill
Following your instructions I use your file (looks the same as I use before)
and I place in the properly log directory for each of the WSJT-X (totally 4)
and doesn’t work, the PTT is not share.
I wonder why if in WSJT-X 2.2.2 the PTT com port was share by default now is
not?
Regards
Alex, HB9DRI
From: Bill Somerville <[email protected]>
Sent: Monday, February 15, 2021 6:29 PM
To: [email protected]
Subject: Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port
Hi Alex,
try the attached file. It needs to go in the log files directory of each WSJT-X
instance ("Settings->File->Open log directory").
73
Bill
G4WJS.
On 15/02/2021 05:41, Alex Artieda, HB9DRI wrote:
Hello Mike
Sorry I didn’t answer to the list;
I create a file named hamlib_settings.json and paste inside the code you send
me:
{
"config": {
"ptt_share": 1
}
}
Then place this file in C:\Users\[username]\AppData\Local\WSJT-X and in
Each of the 4 WSJT-X folders but doesn’t work,
Alex, HB9DRI
From: Black Michael via wsjt-devel <[email protected]>
Sent: Monday, February 15, 2021 11:11 AM
To: [email protected]
Cc: Black Michael <[email protected]>
Subject: Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port
The PTT port is no longer shareable by default.
Place this file in C:\Users\[username]\AppData\Local\WSJT-X
{
"config": {
"ptt_share": 1
}
}
Mike W9MDB
On Sunday, February 14, 2021, 07:43:47 PM CST, Alex Artieda, HB9DRI
<[email protected]> wrote:
Just to inform you, I found a bug regarding COM port for PTT, it appears in
WSJT-X 2.3 and in 2.4 RC1, let me explain.
I run 4 WSJT-X at the same time, I use Omnirig to control my IC9700 but PTT is
manage via a COM port, this is a must for me to TX first a Sequencer via the
COM port and later TX the radio, I cannot use CAT for PTT, that guarantee me
no RF spikes etc. 4 WSJT-X plus MAP65 plus WSJT10 are all configure to use COM3
for PTT, in this configuration I can TX with ANY of the 6 programs, more
precise I can TX with the program were the decodes or best decode happens,
unfortunate since WSJT-X 2.3 and 2.4RC1 I can TX ONLY with the FIRST program
who opens the PTT COM port, the other ones don’t work and MAP65 give a opening
COM port ERROR, the other WSJT-X simple don’t TX, would be great to fix this
bug because when you run multiple WSJT-X is a must to work with all instance
capable of TX, WSJT-X 2.2.2 works perfect.
To confirm this bug I roll back to 2.2.2 and install 2.3 and later 2.4RC1, the
bug appear in 2.3
73 de Alex, HB9DRI
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
