Further testing with the version Mike W9MDB sent me the other day: Split Operation > Fake It still does not work correctly. Examples: FT8 - transmit dF 2000Hz; radio moves up 1 kHz to transmit (should only go up 500 Hz?), but down only 500 Hz each cycle MSK144 - calling CQ 263, starts out OK, reverts to all .260 after a few cycles.
Split Operation > Rig works correctly, but the frequency display flashes between different readings (too fast to identify) at the end of each transmit sequence. Tried rc2 - Split Operation > Rig; freq display only flashes once before settling back down. Re-installed v2.3.0 to confirm that it still works properly, and it does. Back to v2.4.0 rc3b, the one Mike MDB sent the other day. Split Operation > Fake It - FT8 - if I answer a CQ and use a transmit dF that requires shifting my freq, it behaves properly. If I CALL CQ with a transmit dF that requires a shift, the radio will move up 1 kHz to transmit, but back down only 500 Hz. To receive. Hope this helps and doesn’t confuse things! Thank you. 73, Mike Cizek WØVTT > On Mar 18, 2021, at 4:55 PM, Mike Cizek W0VTT <mgci...@gmail.com> wrote: > > > Thanks Bill, > > Using Split Operating > Rig seems to work fine on FT8. I can’t find anyone > on meteors right now to test it split on MSK144. > > Mike W9MDB – will download and install that new version now and report back. > > ---- > 73, > Mike Cizek W0VTT > > From: Bill Somerville <g4...@classdesign.com> > Sent: Thursday, 18 March, 2021 15:56 > To: wsjt-devel@lists.sourceforge.net > Subject: Re: [wsjt-devel] Bug Report v2.4.0 rc3 K3s Freq Control > > Hi Mike, > > thanks Mike, I asked because the K3 series have known issues with getting > confused if they have multiple PTT sources. > > Please try "Settings->Radio->Split Operating->Rig" and let me know if that > improves things. If it does then I will need to get some diagnostic info from > you to find out what is going wrong with "Fake It" split mode. > > 73 > Bill > G4WJS. > > On 18/03/2021 20:08, Mike Cizek W0VTT wrote: > Hello Bill, > > No, there is no VOX. PTT is provided via the USB cable. > > ---- > 73, > Mike Cizek W0VTT > > From: Bill Somerville <g4...@classdesign.com> > Sent: Thursday, 18 March, 2021 11:05 > To: wsjt-devel@lists.sourceforge.net > Subject: Re: [wsjt-devel] Bug Report v2.4.0 rc3 K3s Freq Control > > Mike, > > it is certainly possible, but there need be no doubt. When you K3s is in USB > DATA A mode is the VOX indicator showing on the K3s display panel? > > 73 > Bill > G4WJS. > > On 18/03/2021 15:58, Mike Cizek W0VTT wrote: > Hello Bill, > > Highly unlikely, and maybe not possible. The “audio” between the rig and > computer is all digital; sound card is built in to the radio. As noted, > v2.3.0 and earlier all worked fine. > > ---- > 73, > Mike Cizek W0VTT > > From: Bill Somerville <g4...@classdesign.com> > Sent: Thursday, 18 March, 2021 10:49 > To: wsjt-devel@lists.sourceforge.net > Subject: Re: [wsjt-devel] Bug Report v2.4.0 rc3 K3s Freq Control > > Hi Mike, > thanks for that. Could the K3s be getting PTT from another source as well, > DATA VOX enabled for example? > > 73 > Bill > G4WJS. > > On 18/03/2021 15:44, Mike Cizek W0VTT wrote: > Hello Bill, > > Guess I should have included all settings: > > Baud Rate: 38400 > Data Bits, stop bits, handshake: Default > PTT Method : CAT > Mode: Data/Pkt > Split Operation: Fake It > > > ---- > 73, > Mike Cizek W0VTT > > From: Bill Somerville <g4...@classdesign.com> > Sent: Thursday, 18 March, 2021 10:19 > To: wsjt-devel@lists.sourceforge.net > Subject: Re: [wsjt-devel] Bug Report v2.4.0 rc3 K3s Freq Control > > On 18/03/2021 15:15, Mike Cizek W0VTT wrote: > Greetings, > > Frequency control problems in v2.4.0 rc2 and rc3. (did not try rc1) v2.3.0 > and earlier worked fine. > > FT8 or Q65 – when transmitting at audio dF that requires shifting the > transmit freq (df 2000Hz), WSJT will move the radio up 500 Hz, but does not > always return to the original receive freq. Radio will “walk” up (or down) > the band in 500 Hz steps. I can see the freq display on the K3s flicker when > changing from transmit to receive. > > MSK144 – Calling CQ 266 on 50.260, the radio will sometimes behave properly, > sometimes revert to calling and listening on 50.260. > > WSJT-X v2.4.0 rc3; Mode = Data/Pkt; Split Operation = Fake It > Elecraft K3s with internal sound card; single USB cable for both audio and > rig control > Lenovo ThinkpadX390; i7 CPU; WIN10 Pro > > Thank you. > > ---- > 73, > Mike Cizek W0VTT > Hi Mike, > > which option do you have for "Settings->Radio->PTT Method"? > > 73 > Bill > G4WJS. > >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
