I've lost a fine DX QSO with the C92RU expedition station thanks to the same QSY phenomena! 73, Andy HA6NN
On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR <pa0...@mubo.nl> wrote: > Can someone help me with the following observation? Is this a problem with > my settings, is it a bug or is there some other reason? > > I have 2 instances '1' and '2' which are connected to an ANAN transceiver > with CAT over separate virtual COM ports. The system works very well when > split operation is set to 'None'. > > When split operation is set to 'Fake it' then during transmission on > instance 1 BOTH instances change their dial frequency according to their > respective Audio TX Frequency settings. > I had not expected instance 2 to change frequency. > The radio VFO 2 does not change. > This applies when the last band switch was done using the instance 2 band > control. > > When I do a band switch using the radio (VFO 2), say from 20m to 17m, > WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 > becomes even more confusing. > During transmission on instance 1, the dial frequency for instance 1 > changes as before but instance 2 changes back to 20m, again with the > corresponding offset. > > My station: > 2 * WSJT-X v2.4.0-rc4 > Windows 8.1 > > Unique identifiers have been assigned to the 2 instances. > > UDP settings are the same for the 2 instances. > UDP server: 239.255.0.0 > UDP Server port number: 2237 > Outgoing interfaces: loobback_0 > Multicast TTL: 1 > All 3 UDP checkboxes are checked. > > 73, > Ton PA0TBR > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
