Hello Ton,

 

I had similar problems with 2.4.0 changing freq. Speeding up the polling rate 
on LP Bridge seems to have cured it.  Maybe you can change settings for the 
virtual ports with your Anan?

 

----

73,

Mike Cizek W0VTT

 

From: Ton PA0TBR <[email protected]> 
Sent: Thursday, 15 April, 2021 01:55
To: WSJT software development <[email protected]>
Subject: Re: [wsjt-devel] Strange interaction between 2 instances when using 
'Fake it' split operation

 

I am sorry to hear that Andy.

Thanks for confirming that it's not just me seeing this.

73,

Ton PA0TBR

 

 

On Wed, 14 Apr 2021 at 23:41, Andras Bato <[email protected] 
<mailto:[email protected]> > wrote:

I've lost a fine DX QSO with the C92RU expedition station thanks to the same 
QSY phenomena!

73,

Andy HA6NN

 

On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR <[email protected] 
<mailto:[email protected]> > wrote:

Can someone help me with the following observation? Is this a problem with my 
settings, is it a bug or is there some other reason?

 

I have 2 instances '1' and '2' which are connected to an ANAN transceiver with 
CAT over separate virtual COM ports. The system works very well when split 
operation is set to 'None'.

When split operation is set to 'Fake it' then during transmission on instance 1 
BOTH instances change their dial frequency according to their respective Audio 
TX Frequency settings.
I had not expected instance 2 to change frequency.
The radio VFO 2 does not change.
This applies when the last band switch was done using the instance 2 band 
control.

When I do a band switch using the radio (VFO 2), say from 20m to 17m, WSJT-X 
instance 2 follows accordingly, but now a transmission on instance 1 becomes 
even more confusing.
During transmission on instance 1, the dial frequency for instance 1 changes as 
before but instance 2 changes back to 20m, again with the corresponding offset.

My station:
2 * WSJT-X v2.4.0-rc4
Windows 8.1

Unique identifiers have been assigned to the 2 instances.

UDP settings are the same for the 2 instances.
UDP server: 239.255.0.0
UDP Server port number: 2237
Outgoing interfaces: loobback_0
Multicast TTL: 1
All 3 UDP checkboxes are checked.

 

73,

Ton PA0TBR

_______________________________________________
wsjt-devel mailing list
[email protected] <mailto:[email protected]> 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

_______________________________________________
wsjt-devel mailing list
[email protected] <mailto:[email protected]> 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to