Hi Mike W9MDB, Losing the reception of the Fox occurs to several types of radios mainly when Hound has to keep repeating -say- R-24. Then, WSJT-X starts changing Hund's frequency down step by step. 73, Andy
On Thu, Apr 15, 2021 at 2:42 PM Black Michael via wsjt-devel < [email protected]> wrote: > Couple of thoughts.... > > #1 Why are two instances being run? What's the use case? > #2 What rig selection are you using? Should be either Flex or PowerSDR. > #3 You might have more success running FLRig and connecting both WSJT-X > instances to the one FLRig...that way you end up with just 1 program > actually controlling the rig. Theres a PowerSDR rig selection in FLRig > that I contributed. > > Mike W9MDB > > > > > On Thursday, April 15, 2021, 07:00:06 AM CDT, Andras Bato < > [email protected]> wrote: > > > Hi Mike, > What can I do with my FT450D radio to avoiding losing the reception of the > Fox? > 73, > Andy > > On Thu, Apr 15, 2021 at 1:11 PM Mike Cizek W0VTT <[email protected]> > wrote: > > Hello Ton, > > > > I had similar problems with 2.4.0 changing freq. Speeding up the polling > rate on LP Bridge seems to have cured it. Maybe you can change settings > for the virtual ports with your Anan? > > > > ---- > > 73, > > Mike Cizek W0VTT > > > > *From:* Ton PA0TBR <[email protected]> > *Sent:* Thursday, 15 April, 2021 01:55 > *To:* WSJT software development <[email protected]> > *Subject:* Re: [wsjt-devel] Strange interaction between 2 instances when > using 'Fake it' split operation > > > > I am sorry to hear that Andy. > > Thanks for confirming that it's not just me seeing this. > > 73, > > Ton PA0TBR > > > > > > On Wed, 14 Apr 2021 at 23:41, Andras Bato <[email protected]> wrote: > > I've lost a fine DX QSO with the C92RU expedition station thanks to the > same QSY phenomena! > > 73, > > Andy HA6NN > > > > On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR <[email protected]> wrote: > > Can someone help me with the following observation? Is this a problem with > my settings, is it a bug or is there some other reason? > > > > I have 2 instances '1' and '2' which are connected to an ANAN transceiver > with CAT over separate virtual COM ports. The system works very well when > split operation is set to 'None'. > > When split operation is set to 'Fake it' then during transmission on > instance 1 BOTH instances change their dial frequency according to their > respective Audio TX Frequency settings. > I had not expected instance 2 to change frequency. > The radio VFO 2 does not change. > This applies when the last band switch was done using the instance 2 band > control. > > When I do a band switch using the radio (VFO 2), say from 20m to 17m, > WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 > becomes even more confusing. > During transmission on instance 1, the dial frequency for instance 1 > changes as before but instance 2 changes back to 20m, again with the > corresponding offset. > > My station: > 2 * WSJT-X v2.4.0-rc4 > Windows 8.1 > > Unique identifiers have been assigned to the 2 instances. > > UDP settings are the same for the 2 instances. > UDP server: 239.255.0.0 > UDP Server port number: 2237 > Outgoing interfaces: loobback_0 > Multicast TTL: 1 > All 3 UDP checkboxes are checked. > > > > 73, > > Ton PA0TBR > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
