Try a new config and see if that fixes the problem.
wsjtx -r test
Mike W9MDB
On Friday, November 12, 2021, 01:14:04 AM CST, Saku via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
HI!
I see the problem #1 every day when I open wsjtx. And every day I shrink it
horizontally to minimum. And again it starts wider than set at last time.
It is a "property" and I have tried to modify the main window with QT
designer, but as it branches to several pages it seems to be very hard to
modify and I have not yet succeeded to create version that would be at minimum
width from start.
It is very bad thing, but seems to be that one just have to live with it. I
think most people use the main window larger than minimum and so it is out of
interest to make it keep its size, even when minimized.
With problem #2 I have noticed that transmit tone can suddenly change to PC
internal sound card and then back again to rig's sound card. It may happen even
during same transmit period.
And other nasty "feature" is that sometimes, when split/rig is used, receive
frequency (vfo1) may get it's frequency from last used TX frequency (of vfo2).
So suddenly you find out that half of waterfall is empty and when check the RX
frequency it has jumped to last used TX frequency.
How ever I count both these to be caused by RF problems because they are
related to band and power used and also the weather outside that twists OCF
dipole properties.
Fedora 34/Icom 7300
Stephen Mitchell via wsjt-devel kirjoitti 11.11.2021 klo 13.57:
I recently updated WSJT-X on my PC to the latest version and ever since I’ve
noticed two things:
- I sized the windows for the waterfall and decodes to my liking but with
the latest version, when I start the application the decodes window continues
to open up larger than the waterfall window, which stays at the size I set it
to.
- When I launch the application it sets the frequency .055 Hz higher than
what the frequency should be. I’ve included a screenshot of what happens when
I first launch the program. I don’t know if these are true bugs or if I just
don’t have something configured properly.
Thank you – K7CB
--
Saku
OH1KH _______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
