Hi!
Found also another issue:
If wsjt-x is closed with Hound-mode running the *next start will
activate hound-mode again* (tested that by setting TX under 1000Hz and
started TX. It jumped random ove 1000Hz) *but the mainwidow view is mixed*.
As you can see red "hound" stays there, but there is also "Hold TX
frequency" visible.
In addition to that the button "H" is not colored as should.
Pressing "H" button will color it and also remove "Hold TX frequency".
Tested that with clean start to be sure that any of my settings could
effect that:
wsjtx -r testing
Then set callsign, locator,rig,audio and hound mode on.
Out of settings -> stopped wsjtx
Started again
wsjtx -r testing
View can be repeated.
Fedora release 35 (Thirty Five)
wsjt-x2.6.0-rc4 self compiled, source from
https://git.code.sf.net/p/wsjt/wsjtx (same day as Hamlib below)
rigctl Hamlib 4.5~git fri sep 16 13:33:51 2022 +0000 SHA=b1d132
--
Saku
OH1KH
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
