Hi Saku, Thanks for the bug report. Should be fixed with the next release. Under certain conditions, some special operating modes were not fully initialized when WSJT-X was started in such a mode.
73 de Uwe, DG2YCB Am 18.09.2022 um 15:13 schrieb Saku via wsjt-devel:
Hi! Found also another issue: If wsjt-x is closed with Hound-mode running the *next start will activate hound-mode again* (tested that by setting TX under 1000Hz and started TX. It jumped random ove 1000Hz) *but the mainwidow view is mixed*. As you can see red "hound" stays there, but there is also "Hold TX frequency" visible. In addition to that the button "H" is not colored as should. Pressing "H" button will color it and also remove "Hold TX frequency". Tested that with clean start to be sure that any of my settings could effect that: wsjtx -r testing Then set callsign, locator,rig,audio and hound mode on. Out of settings -> stopped wsjtx Started again wsjtx -r testing View can be repeated. Fedora release 35 (Thirty Five) wsjt-x2.6.0-rc4 self compiled, source from https://git.code.sf.net/p/wsjt/wsjtx (same day as Hamlib below) rigctl Hamlib 4.5~git fri sep 16 13:33:51 2022 +0000 SHA=b1d132 -- Saku OH1KH _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
