I can supply some screen shots of my radio. I have a third behaviour. My trick of tripping Halt and Enable also sometimes fails to bring the audio back. Tx still occurs but no audio is passing.
If I exit WSJT-X and restart it, audio returns to the Tx. Alan McDonald VK2MET From: Alan McDonald via wsjt-devel <wsjt-devel@lists.sourceforge.net> Sent: Tuesday, 1 November 2022 10:56 AM To: wsjt-devel@lists.sourceforge.net Cc: Alan McDonald <a...@meta.com.au> Subject: [wsjt-devel] 2.6.0 RC and HamRadioDeluxe Radio issue I notice there is a beta RC 2.6.0 out and I am trying it because it mentions the HamRadioDeluxe rig control. I certainly notice an issue with the HamRadioDeluxe rig control and it's not solved for me with 2.6.0 RC I am using IC-7300 and HamRadioDeluxe radio set in WSJT-X and the latest HamRadioDeluxe software. It works fine about 70% of the time. But it often jumps into a mode where Tx power drops and no audio is output. Sometimes there is audio but the sig output is a vague USB transmission about 1.5-2k wide (up from the ref frequency). All other rig control functions using the HRD Rig Control interface work fine with my IC-7300 radio. I can fix it sometimes by clicking Halt TX followed by about 1 sec, then click Enable Tx and it goes back to normal. Sometimes this technique fails and I have to exit WSJT-X and restart it. It works fine for a while again. If I just go direct via com port 6 I never have the issue. But that means exiting HRD rig control each time and I certainly like opening WSJT-X with one click rather than the scramble required to disconnect and reconnect etc. Plus the logging and multi-casting is important to me as well to use GridTracker. Alan McDonald
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
