The currently published version of the hamlib dll still crashes when
selecting ICOM IC-7610, regardless of async setting.
It does not seem to work for other ICOM models either, but it does not
crash the program.
Control via DXLab Commander is a good workaround while this is being worked
on.
Björn SM7IUN
On Wed, Jul 12, 2023 at 3:20 PM Black Michael via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Save this into a file called "hamlib_settings.json" and place in the same
> folder as WSJT-X.ini
> Should improve things until I get this fixed.
>
> {
> "config": {
> "async": "0"
> }
> }
>
>
> Mike W9MDB
>
>
>
>
>
>
>
>
> On Wednesday, July 12, 2023 at 07:44:53 AM CDT, Roger Newey (K7GXB) <
> k7...@narundi.net> wrote:
>
>
>
>
>
> Hi Mike,
> FYI:
> Win10 Task Manager shows:
> WSJT-X CPU during Rx: 35-38%
> WSJT-X CPU during Tx: 35-36%
>
> System:
> WSJT-X running WSPR "wsjtx-2.7.0-rc2-win64.exe" as downloaded 07-Jul-2023
> (Installed over WSJT 2.6.0);
> Rig: ICOM 7300; Win10 on dedicated Celeron J4125 with 16GB RAM;
> (J4125 has Cores. 4 ; Threads. 4 ; Burst 2.70 GHz ; Processor Base 2.00
> GHz ; Cache. 4 MB).
>
> Regret I don't have comparable CPU data for 2.6.0 but will install it if
> that helps.
>
> 73,
> Roger (K7GXB)
>
> -----Original Message-----
> From: Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net>
> Sent: Tuesday, July 11, 2023 20:47
> What rig do you have?
> Mike W9MDB
> ...
> On my Win10 PC, this new version idles at 32% usage which is essentially
> the same as the earlier "4.6~git Jun 28" version. The older
> libhamlib-4.dll v4.5.4 idles at less than 2%.
> Drew K9CW
> ...
> ---
>
>
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
