Hi Taka-san, No need to uninstall anything. JTDX has it's own configuration, leave as it is. Just create 2 new shortcuts on wsjtx.exe file -rXYZ and -rABC (or something like that) you'll have completely new configuration and you'll need to set all settings again.
With rigctld I used in past worked great with up to 3 or more different applications. Only problem never discovered how to share the same comm port for PTT. You should try Omnirig to share the CAT control over the applications. In most cases deleting wsjtx.ini file helps. 73 9A5CW pet, 5. sij 2024. 16:46 JP3EXR via wsjt-devel < wsjt-devel@lists.sourceforge.net> je napisao: > Hi Patrik > > > > Thank you for the advice about my in trouble of you run two JT65B. > > I think I will uninstall JTDX and Q65 and FT8 of WSJT-X. > > So I think it's easy. > > So I just have one WSJT-X program and one JTDX program under C drive. > > And delete all of JTDX and WSJT folders under AppData Local. > > But I will back up all of the AppData Local folder in advance. > > Then I run two icons of two JT65B then the icon make two JT65B folder > under AppData Local. > > Then I copy two JT65B folder from the backup to under AppData Local. > > And then I check run two JT65B test again. > > If it's Okay then I think I will try to testing install JTDX because I > think the rig control or the audio control are not share with WSJT-X. > > > > Taka > > > > *From:* Patrick 9A5CW via wsjt-devel <wsjt-devel@lists.sourceforge.net> > *Sent:* Friday, January 5, 2024 11:26 PM > *To:* Black Michael <mdblac...@yahoo.com>; WSJT software development < > wsjt-devel@lists.sourceforge.net> > *Cc:* Patrick 9A5CW <pat.9a...@gmail.com> > *Subject:* Re: [wsjt-devel] I have in trouble JT65B of WSJT-X > > > > Mike, > > It is eme delay and # deep search or so decode. > > He need to make 2 new shortcuts and try with clean configuration too see > if anything changes. > > > > I have noted similar problem on FT8 when decode button stays Cyan and no > more decodes. Need to do few test with latest release to see if is still > happening. > > > > 73, Patrik 9A5CW > > > > > > pet, 5. sij 2024. 15:09 Black Michael via wsjt-devel < > wsjt-devel@lists.sourceforge.net> je napisao: > > Your time looks off by quite a bit. Is your waterfall still working and > just not decoding? > > Check here http://time.is > > And you can use Meinberg NTP to keep your time in sync. > > Just be careful when installing. Easy to miss the configuration setup > right after it shows the installation files scrolling by. > > Here's a video showing how to install it... > > > Mike W9MDB > > > > > > > > > > On Thursday, January 4, 2024 at 03:51:24 AM CST, JP3EXR via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > > > > > > Hi wsjtx development team. > > Thank you for helping me with my trouble. > > Sorry I forgot to send you about my trouble situation. > Please check the two attached pictures. > I am sorry for the Japanese display on the two attached screens. > > Both pictures run two JT65B of WSJT-X on my PC. > Then you know two JT65B were decoding every periods. > > Please check the sample aa. > I turned on the Enable TX on the left side of two JT65B. > Then on the left side of two JT65B had TXing started at 0721. > The on the right side JT65B was decoding every periods even on the left > side of two JT65B had TXing started. > You can see the decoding time of the single pass decode on the right side > of JT65B. > The decoding process of JT65B on the right side became freezing from 0721. > > Please check the sample ca. > I turned on the Enable TX on the right side of two JT65B. > Then on the right side of two JT65B had TXing started. > Then The decoding process of JT65B on the left side is the same as the > sample a. > > I am checking under what circumstances multiple JT65B are decoding freeze. > I think two JT65B are decoding every periods if both JT65B does not TX. > But JT65B of the TXing side does not decode in the TX period. > I think the decoding freeze of JT65B at the same periods of not TX side of > JT65B when TXing of JT65B finished of TXing period. > And the decoding freeze may occur immediately at the earliest, or until > about 10 TXing at the latest. > > Please contact me if you need additional confirmation. > Best regard > Thank you > > Taka, JP3EXR > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
