Hi Taka, Larry, and all
I would really like to help you, but the error simply does not occur on
my PC. I have run numerous tests with two instances this morning. Both
with WSJT-X v2.6.1 and v2.7.0-rc3 and with wsjt-x_improved v2.7.1-devel.
I tested various settings (EME delay on/off, with FT-991 CAT control vs
without (i.e. CAT = None), real transmission via antenna vs virtual
audio, and so on). Result: There was *not a single case* where this
error occurred. It always worked perfectly with JT65B, and with the
other modes. The decode button did not get stuck, and I was also able to
decode my own transmissions from the first instance with the second one
without any problems when using my virtual audio cable. (Due to time
constraints, I only tested the latter for my 2.7.1-devel version).
Very important: The error that the second instance hangs after you have
transmitted with the first one (visible by the fact that the Decode
button remains cyan) always occurs if not both instances were started
with the " --rig-name=InstanceNameXYZ" parameter but only the second
one. In this case, the "zeroth" instance (that without the "
--rig-name..." parameter) shoots down all the others. So please make
sure once again that this is not the case. Perhaps caused by a spelling
mistake (" -rig-name..." instead of " --rig-name..." or something like
that).
73 de DG2YCB,
Uwe
________________________________________
German Amateur Radio Station DG2YCB
Dr. Uwe Risse
eMail: dg2...@gmx.de
Info: www.qrz.com/db/DG2YCB
Am 05.01.2024 um 04:19 schrieb Larry Davis via wsjt-devel:
i can run any of the other modes msk q65 but to try to run 2 jt65b on
the same computer one tx and one rxing the second one hang up on
decode you can run one all day long no problem i just stoped running
two version of jt65b
On Thursday, January 4, 2024 at 08:27:45 PM CST, Larry Davis via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
i don,t think it is a problem with the computer i ran into same
problem with 13900k 64 gb of ram with 2 wsjtx open on jt65b second
computer 14900k 64gb of ram same problem i just think it a bug when
you run 2 wsjtx the second one hang up on decodes
------------------------------------------------------------------------
*From:* JP3EXR via wsjt-devel <wsjt-devel@lists.sourceforge.net>
*Sent:* Thursday, January 4, 2024 5:28 PM
*To:* 'Black Michael' <mdblac...@yahoo.com>;
wsjt-devel@lists.sourceforge.net <wsjt-devel@lists.sourceforge.net>
*Cc:* JP3EXR <exr0...@gmail.com>
*Subject:* Re: [wsjt-devel] I have in trouble JT65B of WSJT-X
Hi Mike W9MDB
Good morning from Japan.
Thank you for your cooperation.
Thank you for asked me about my current PC spec.
You are able to see the attached picture of my current PC specification.
My current PC has 16GB memory and CPU has i7-4790K.
I used an older PC has 8GB memory and i5 CPU for WSJT-X.
I thought that my JT65B in problem was caused by the slow speed of my
old PC.
So I was thinking the same thing as Mike until November last year.
I thought I was able to solve my JT65B problem by replacing it with
the current faster PC.
Then I replaced my older PC to my current PC in November last year.
But unfortunately, my in problem with run two JT65B cannot be resolved
at this time.
I will test the advice you gave me yesterday on my WSJT PC today.
Then I will also email you of the test results.
Thank you
Taka, JP3EXR
-----Original Message-----
From: Black Michael <mdblac...@yahoo.com>
Sent: Friday, January 5, 2024 2:40 AM
To: wsjt-devel@lists.sourceforge.net
Cc: JP3EXR <exr0...@gmail.com>
Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X
How much memory do you have in your computer?
Mike W9MDB
On Thursday, January 4, 2024 at 03:51:24 AM CST, JP3EXR via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hi wsjtx development team.
Thank you for helping me with my trouble.
Sorry I forgot to send you about my trouble situation.
Please check the two attached pictures.
I am sorry for the Japanese display on the two attached screens.
Both pictures run two JT65B of WSJT-X on my PC.
Then you know two JT65B were decoding every periods.
Please check the sample aa.
I turned on the Enable TX on the left side of two JT65B.
Then on the left side of two JT65B had TXing started at 0721.
The on the right side JT65B was decoding every periods even on the
left side of two JT65B had TXing started.
You can see the decoding time of the single pass decode on the right
side of JT65B.
The decoding process of JT65B on the right side became freezing from 0721.
Please check the sample ca.
I turned on the Enable TX on the right side of two JT65B.
Then on the right side of two JT65B had TXing started.
Then The decoding process of JT65B on the left side is the same as the
sample a.
I am checking under what circumstances multiple JT65B are decoding freeze.
I think two JT65B are decoding every periods if both JT65B does not TX.
But JT65B of the TXing side does not decode in the TX period.
I think the decoding freeze of JT65B at the same periods of not TX
side of JT65B when TXing of JT65B finished of TXing period.
And the decoding freeze may occur immediately at the earliest, or
until about 10 TXing at the latest.
Please contact me if you need additional confirmation.
Best regard
Thank you
Taka, JP3EXR
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
