Hi Mark, do not want to muddy the waters with what your trying to achieve but yes, it's pretty well as you described, I have three rigs with WSJT-X connected, all Icom in the mix, one has external USB sound card, the others have an internal sound card and CAT from the rig. For me it is ONLY when I go to TX the first time after turning the monitor on (which has its own sound interface in it as it has speakers in the monitor that I have not been able to disable) when I have returned to the shack, I am a SIX metre nut so rigs run 24x7 here.
Audio TAB in settings all show the right settings but it seems that Windows has moved the playing field under WSJT-X, If I change the TX to be default, hit okay, then go back in and set back to the right one, then all is good. It would seem that it just needs to be able to enumerate all the interfaces and rematch to the right one that is listed in the WSJT-X settings list. I hope you get some where with your endeavors. Regards, Peter, vk5pj On Thu, Nov 21, 2024 at 1:33 PM mark--- via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hi Peter, > > > > I have never experienced the problem you are describing. The problem I > see is very easy to reproduce. > > If you can come up with a way to reproduce the problem, I could take a > shot at it. > > > > Let me see if I have this right… > > > > Have a USB based sound card attached to the Windows computer > > Open WSJT-X > > (do you have to go into transmit? > > Power down the sound card (does a simple disconnect also cause it) > > WSJT-X puts up the “Error in sound card” message (is it always transmit > audio, usually transmit). (Does it only happen whey you are transmitting?) > > (Does going into settings/Audio tab and setting the menu items for sound > cards resolve the issue? > > (What rig are you using) > > > > > > > > And, oh… by the way… can anyone answer the original question (If I come up > with a change that would make the product better, what is the typical > procedure submitting it? Create a git branch and merge request? File that > can be used as an input to patch? Something else? Are there coding > standards (lint, etc)? > > > > Mark > > > > Mark > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
