Peter,
I don't know if this is a wjstx issue or a flrig issue. If you are unable to
rectify your problem with help from this group, may I suggest posing the
question to the linuxham group. I have placed the link below. That group is
active and involves the programs created by W1HKJ, including flrig.
Best of luck,73,Andy, ka2uqw
https://groups.io/g/linuxham
On Saturday, July 26, 2025 at 09:22:07 PM EDT, Peter Sumner via wsjt-devel
<[email protected]> wrote:
Hi, for some time now (all of the 2.7 variants and now 2.8) when I open WJST-X
or swap between configurations, I end up with a rig control error and the
current rig is shown to be "ADAT www.adat.ch" and not the previously selected
FLRIG setting.
I have learned to live with this for a while and today decided I should report
this difficulty for evaluation.
I use the FLRIG interface as it lets me see on my PC desktop what the SWR,
power out and other settings of my two icom rigs as I do a lot of operating
from the comfort of the house rather than the 50 metre journey to my shack in
the stables shed.
So far I have tried an empty INI file a few times and the error occurs with
each iteration of testing I do, where I have set up multiple configurations.
If I leave it as a SINGLE configuration then there is no error seen. Once I add
a second or more configuration using FLRIG as the rig type I start seeing the
Rig control error when starting WSJT-X or swapping configurations.
When testing, if I use a direct connection (IC-7610) then I can add multiple
configurations and not see an error when starting or swapping configs so the
error seems to be confined to having FLRIG selected as a rig type.
PC is a Windows 10 X64 O/S which is current with all updates.
I have noticed that in the WSJT-X.INI file, that FLRig is shown in there with a
trailing space and has inverted commas in some instances and in differently in
other config (quite a puzzle for me), where as other entries are not shown like
that, here are some examples from my BIG ini file that has about 8
configurations in it
Rig=Icom IC-7610Rig=FLRig FLRigRig="FLRig "Rig=FLRig IC-7610(FLRig)
hope I have no missed anything, any help would be appreciated
Regards,Peter, vk5pj_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
