Great use for AI: have it deal with the configuration for Flrig, Fldigi, Js8call and Wsjtx.
"AI, I'm going to get a coffee, when I come back, have these all talking to the radio properly, and have it come up the same way every time things get posted up. Cheers" On Sun, Jul 27, 2025, 6:03 PM Peter Sumner via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hi Andy, > thanks for the link, will have a look there. > > Since my original post I have dug deeper and widened my field of testing. > I can see on 'other' derivatives of WSJT-X that the rig type is stored as > "Q65-eme\Configuration\Rig=FLRig FLRig" and not the mangled: Rig="FLRig " I > see in the current releases of WSJT-X and the Improved version. > > It would seem an error has crept into the code base at some point that > mangles the storage of this parameter when selecting FLRig in the > Configuration menu. > > Regards, > Peter, vk5pj > > On Mon, Jul 28, 2025 at 3:07 AM Andrew Neumeier via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > >> Peter, >> >> I don't know if this is a wjstx issue or a flrig issue. If you are >> unable to rectify your problem with help from this group, may I suggest >> posing the question to the linuxham group. I have placed the link below. >> That group is active and involves the programs created by W1HKJ, including >> flrig. >> >> Best of luck, >> 73, >> Andy, ka2uqw >> >> https://groups.io/g/linuxham >> >> >> >> >> >> On Saturday, July 26, 2025 at 09:22:07 PM EDT, Peter Sumner via >> wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: >> >> >> Hi, >> for some time now (all of the 2.7 variants and now 2.8) when I open >> WJST-X or swap between configurations, I end up with a rig control error >> and the current rig is shown to be "ADAT www.adat.ch" and not the >> previously selected FLRIG setting. >> >> I have learned to live with this for a while and today decided I should >> report this difficulty for evaluation. >> >> I use the FLRIG interface as it lets me see on my PC desktop what the >> SWR, power out and other settings of my two icom rigs as I do a lot of >> operating from the comfort of the house rather than the 50 metre journey to >> my shack in the stables shed. >> >> So far I have tried an empty INI file a few times and the error occurs >> with each iteration of testing I do, where I have set up multiple >> configurations. >> >> If I leave it as a SINGLE configuration then there is no error seen. Once >> I add a second or more configuration using FLRIG as the rig type I start >> seeing the Rig control error when starting WSJT-X or swapping >> configurations. >> >> When testing, if I use a direct connection (IC-7610) then I can add >> multiple configurations and not see an error when starting or swapping >> configs so the error seems to be confined to having FLRIG selected as a rig >> type. >> >> PC is a Windows 10 X64 O/S which is current with all updates. >> >> I have noticed that in the WSJT-X.INI file, that FLRig is shown in there >> with a trailing space and has inverted commas in some instances and in >> differently in other config (quite a puzzle for me), where as other entries >> are not shown like that, here are some examples from my BIG ini file that >> has about 8 configurations in it >> >> Rig=Icom IC-7610 >> Rig=FLRig FLRig >> Rig="FLRig " >> Rig=FLRig IC-7610(FLRig) >> >> hope I have no missed anything, any help would be appreciated >> >> Regards, >> Peter, vk5pj >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
