A page in your DokuWiki was added or changed. Here are the details:
Date : 2017/01/02 16:09
Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101
Firefox/45.0
IP-Address : 78.43.90.159
Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483373170
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [You can see a text login screen with grey/white, green, and possibly red letters against a black background, or the screen is entirely black]
User : stefanbaur
@@ -322,10 +322,12 @@
* if that fails, stop the currently running X server, then run ''Xorg
-configure''
* this should output ~/xorg.conf.new, which could then be saved somewhere
else (LAN share, USB media, ...).
* once saved, shut down the ThinClient again.
* rename the saved xorg.conf.new to
x2go-tce.xorg.conf.name-of-your-stubborn-hardware and place it in the x2go-tce
directory
of the tftp|http|https|ftp server you use to deploy your images.
- * When using netboot: on your PXE/TFTP Server, create a separate configuration file
"name-of-your-stubborn-hardware" for this hardware, based on the default file, and create a symlink matching
"01-", followed by the first three out of the six bytes of your hardware address, each separated by
"-" (say, 01-AA-BB-CC when the full MAC was shown as AA:BB:CC:DD:EE:FF), that points to the file
"name-of-your-stubborn-hardware".
- * In your boot configuration file, add the boot parameter
''xorgconfurl=tftp|http|https|ftp://your-http-server-ip-here/x2go-tce/x2go-tce.xorg.conf.name-of-your-stubborn-hardware''
+ * When using netbooting, do the following on your PXE/TFTP Server
+ * create a separate configuration file "name-of-your-stubborn-hardware" for this hardware, based on the default file,
+ * create a symlink matching "01-", followed by the first three out of the six bytes of your hardware address, each
separated by "-" (say, 01-AA-BB-CC when the full MAC was shown as AA:BB:CC:DD:EE:FF),
that points to the file "name-of-your-stubborn-hardware".
+ * In your boot configuration file (either "name-of-your-stubborn-hardware",
when using netbooting, or menu.lst, when using local or USB storage media and
grub-legacy, or X2Go-live1.cfg/X2Go-live1.cfg, when using local or USB storage media and
syslinux), add the boot parameter
''xorgconfurl=tftp|http|https|ftp://your-http-server-ip-here/x2go-tce/x2go-tce.xorg.conf.name-of-your-stubborn-hardware''
===== Support Tools available in X2Go-TCE =====
==== Remote Access to the ThinClient's local display (before any connection is made) ====
--
This mail was generated by DokuWiki at
http://wiki.x2go.org/
_______________________________________________
x2go-commits mailing list
[email protected]
http://lists.x2go.org/listinfo/x2go-commits
