A page in your DokuWiki was added or changed. Here are the details:
Date : 2017/01/02 15:42
Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101
Firefox/45.0
IP-Address : 78.43.90.159
Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483371682
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [List of open ToDos/FIXMEs for this page]
User : stefanbaur
@@ -630,13 +630,12 @@
FIXME User Support: Checking the ThinClient's local printer setup (when using
the ''tcpprint'' boot parameter)
There are several ways to check whether a ThinClient has detected any local
printers:
* Assuming you have remote access to the ThinClient, run ''ls -lah /etc/xinetd.d/jetdirect*'' and examine the files listed there.
- * You can also look at the messages printed during the local printer setup
phase, either by:
- * running ''cat /dev/vcs9'' (you
might have to pipe it through ''less'' to see the entire screen) when connected
remotely, or
- * telling the user to press [Ctrl]+[Alt]+[F9] and to read out what's on
the screen. To return to the login screen, have the user press
[Ctrl]+[Alt]+[F7] ([Alt]+[F7] should work, too), or, once you've successfully
logged in over the network, issue the ''chvt 7'' command.
+ * When connected remotely, you can also look at the messages printed during
the local printer setup phase, by running ''cat /dev/vcs9'' (you might have to
pipe it through ''less'' to see the entire screen).
+ * If you do not have remote access, tell the user to press
[Ctrl]+[Alt]+[F9] and to read out what's on the screen. To return to the login
screen, have the user press [Ctrl]+[Alt]+[F7] ([Alt]+[F7] should work, too),
or, once you've successfully logged in over the network, issue the ''chvt 7''
command.
FIXME User Support: Checking the ThinClient's update status (when using local storage)
There are
several ways to check a ThinClient's update status:
* Assuming you have remote access to the ThinClient, look at the messages printed during the update phase, by running ''cat /dev/vcs10'' (you might have to pipe it through ''less'' to see the entire screen) when connected remotely
* If you do not have remote access, tell the user to press [Ctrl]+[Alt]+[F10] and to read out what's on the screen, preferably starting with the bottom line and continuing upward. To return to the login screen, have the user press [Ctrl]+[Alt]+[F7] ([Alt]+[F7] should work, too), or, once you've successfully logged in over the network, issue the ''chvt 7''
--
This mail was generated by DokuWiki at
http://wiki.x2go.org/
_______________________________________________
x2go-commits mailing list
[email protected]
http://lists.x2go.org/listinfo/x2go-commits
