On Wed, Jul 26, 2017 at 12:05 PM, Walid MOGHRABI <[email protected]> wrote: > That's what I did and it simply didn't work for a Ubuntu based image. > > Most configuration switches for live-build script are not supported under > Ubuntu and well, I don't remember every bits of what were working or not > because I tried monthes ago but it was to tricky and except for Debian, it > was simply unusable as is. > As for the git repos, I tried many combinations and nothing worked as > expected so I basicaly decided to do this by hand and take inspiration from > the howto on what to install/tweak. > > I ended with something that was not that complicated to do, scriptable > (mostly) and working (except for this dual head stuff) so I stopped going the > Live Build way, at least, just the time to sort out things and get back with > some contributions on that part.
Let's not get distracted. Back to your setup. You posted xpdyinfo output some days ago that clearly showed that the real X server on your TCE setup does not offer xinerama. And you posted xrandr output that showed multiple screens for the same X server. Just to be sure nothing got confused: please run both commands again on the TCE's X server. If it stays like this please check the X server's logfile for any randr or xinerama messages. Uli _______________________________________________ x2go-dev mailing list [email protected] https://lists.x2go.org/listinfo/x2go-dev
