On Wed, Jul 26, 2017 at 1:36 PM, Walid MOGHRABI <w.moghr...@servicemagic.eu> wrote: > You're right, here are what you asked, all taken from the TCE directly, not > from within the X2Go session : > > ========================================================================= > root@TCE-CLIENT-DELL-VOSTRO430-4D1ZR4J:~# xdpyinfo -display :0
No, that's wrong! xdpyinfo -ext XINERAMA -display :0 is the right command! > ========================================================================= > root@TCE-CLIENT-DELL-VOSTRO430-4D1ZR4J:~# xrandr --display :0 > Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192 > DVI-I-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) > 510mm x 287mm > 1920x1080 60.00*+ > 1280x1024 75.02 60.02 > 1152x864 75.00 > 1024x768 75.08 60.00 > 800x600 75.00 60.32 > 640x480 75.00 60.00 > 720x400 70.08 > HDMI-1 disconnected (normal left inverted right x axis y axis) > VGA-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) > 510mm x 287mm > 1920x1080 60.00*+ > 1280x1024 75.02 60.02 > 1152x864 75.00 > 1024x768 75.08 60.00 > 800x600 75.00 60.32 > 640x480 75.00 60.00 > 720x400 70.08 > ========================================================================= So I expect the correct command to report 2 heads, one with 1920x1080+1920+0 and one with 1920x1080+0+0 If that is not the case we have the reason for the problems. Uli _______________________________________________ x2go-dev mailing list x2go-dev@lists.x2go.org https://lists.x2go.org/listinfo/x2go-dev