Wow. How did you figure out what to look for?
J On Apr 12, 2011 11:25 PM, "Jeremy McDermond" <[email protected]> wrote: > On Apr 12, 2011, at 7:57 PM, Jarett DeAngelis wrote: > >> Hi gang, >> >> I'm trying to figure out how to get my Kenwood TM-D710A working with Xastir on my Snow Leopard-powered Mac. >> >> I have a Prolific Technology serial-USB Kenwood cable that I know works at least to program the radio with under Windows. I know the programming cable doubles as a TNC connection cable. I am pretty sure that you put the TNC into "PACKET12" mode to make it ready to transmit data via the port on the back of the head unit. >> >> Then what? I tried configuring Xastir to use a "Serial KISS TNC" on /dev/ttys0. When I start the device in Interface Control, Xastir freezes. Not really sure where to proceed from here. > > You have to use the correct serial port name. /dev/ttys0 is for Linux. My Prolific based serial interface shows up as /dev/cu.PL2303-00004326. At a command line prompt, do something like: > > ls /dev/cu.* > > And you'll show all the appropriate serial devices. > >> Thanks in advance, folks. I would RTFM if I had one ;) > > -- > Jeremy McDermond (NH6Z) > Xenotropic Systems > [email protected] > > > > _______________________________________________ > Xastir mailing list > [email protected] > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
