Hi Chris.....i have moved from the outer suburbs of Townsville (Black River)
into a more central are of the city to the suburb of Kirwan
this was done for health reasons....1.3 acres is too much to look after and we need to shops.hospital,doctors etc

im back on air with JT56 but im very limited for antenna space...no room for
hexbeam or dipole... have a S9V18 by LDG for 20m to 6m in the air works quite well if prop is reasonable.

73 David VK4BDJ





On 12/06/14 10:25, Chris Matthews N9JCA wrote:
I have been using the IGATE setup that comes with Xastir both mobile and at home never had any problems; only problem I have is when I set radius for 500+miles there is a station that is setup 24/7 with an Emergency beacon kinda frustrating at times

BTW Dave have you moved from Queensland?

73 Chris N9JCA EM68fb

"I am always doing that which I CANNOT do;
in order that I may LEARN how to do it"

On 06/11/2014 03:37 PM, David wrote:
Hi Lee.....thanks...
i have had Xastir set up as you say for a long time BUT have never seen it work as an I-gate in the way aprsg is at the present time.....
i know it should work and have tried to find out why not but i havent
got too much hair to keep pulling it out HI HI

73 David  VK4BDJ





On 12/06/14 00:43, Lee Bengston wrote:
Hi David,

In Xastir, under File-Configure-Defaults in the menu, there is a section labeled IGate Options. Check the box that says "Allow RF to Inet and Inet to RF traffic", and click OK. Then under Interface-Interface Control in the menu, select your AX25 interface and click the Properties button. The same Igate options that are in the defaults menu are there. Check the same
box for RF to Inet and Inet to RF, and click OK.  In the Inet to RF
direction, this will gate only messages.

Regards,
Lee - K5DAT


On Wed, Jun 11, 2014 at 12:07 AM, David <djm...@bigpond.com> wrote:

Hi Lee...i should have mentioned im using a AX25 tnc port as set out in
the HowTo:AX25 on the Xastir wiki

David



On 11/06/14 13:56, David wrote:

Hi Lee. i bow to your superior knowledge

i have aprsg running on Ubuntu 14.04 .....i have config it to do the same as our other local I-gate which is off the air at this time..using FT-2800
to TNC-X

it takes messages from APRS-IS and TX to the local APRS repeater....
the incoming Igate area is limited to 1300 kms so that i dont flood the
repeater with too much signals.

I have heard that Xastir can IGATE but have only seen how to configure it as a Digipeater...how can Xastir be set up to do what im doing with aprsg

73 David VK4BDJ


On 11/06/14 12:29, Lee Bengston wrote:

On Tue, Jun 10, 2014 at 7:16 PM, David <djm...@bigpond.com> wrote:

  Hi.....agree that update would be good
ability to have an included igate that can be configured

to my knowledge linux only has 3 igate programs worth looking at
aprsg,aprx2,dixprs....the only one ive got working is aprsg....the other two i cant get to work with a AX25 port and a TNC-x...at least i havent
got
the configs correct will keep trying.

​Those are the small programs ideal for running "headless". I've tried

all 3 of them - aprsg is not good as a Tx Igate because it can't be
limited
to gate only messages to RF, which is standard. I like the format of the text config file for aprsg - may have been a little easier than aprx or dixprs, but I have been able to get all of them to work. Dixprs is a bit
tricky when you first try it with AX25 because the ax25 port is
referenced
as "ax0" or "ax1", etc. as the case may be instead of referencing the
name
of the ax25 interface in /etc/ax25/axports like other software does.

In Linux, Xastir already supports Igating​, and so does YAAC.
JavAPRSIgate
also runs in Linux, which is an adjunct to javAPRSServr. Also aprsd
works
as an Igate, and APRSIS32 runs fine in wine, so Linux has a lot more
choices than those 3. I understand DireWolf also can Igate, but I've not
tried it.

Lee - K5DAT

_______________________________________________
Xastir mailing list
Xastir@lists.xastir.org
http://xastir.org/mailman/listinfo/xastir

_______________________________________________
Xastir mailing list
Xastir@lists.xastir.org
http://xastir.org/mailman/listinfo/xastir

_______________________________________________
Xastir mailing list
Xastir@lists.xastir.org
http://xastir.org/mailman/listinfo/xastir

_______________________________________________
Xastir mailing list
Xastir@lists.xastir.org
http://xastir.org/mailman/listinfo/xastir

Reply via email to