On Tue, 13 Jun 2017, Menga wrote:
Usually the display of the SCS PTC when in KISS mode shows KISS. In this case it remained in STBY (stand by) even if it worked correctly. I don?t know much about preloading and postloading configuration scripts, as well as timing in the configuration of KISS mode (I left the standard values found in the configuration window). Have some of you experience to configurate a SCS PTC modem with Xastir, and can give me a suggestion?
I don't believe any of the Xastir developers have one of these modems. At least I've not heard of any that do. It's pretty easy though: Take one of the standard scripts for "startup" and one for "stop" in /usr/local/share/xastir/config/, copy them to new filenames (maybe your "callsign.scs"?), then modify them to hold your TNC's commands. You can test each command from a dumb terminal first, connected to your TNC, while you work on the scripts. Once you have them the way you like, change Xastir to use those filenames instead and you're good to go. Save those files away in a good location in case your hard drive breaks, so you don't have to go through the process again. If you get something you like, consider donating them back to the project and we can add them to Xastir. -- Curt, WE7U. http://we7u.wetnet.net APRS in Search and Rescue: http://we7u.wetnet.net/search_and_rescue.html _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
