Hi Guiseppe, To be honest i have no idea since i don’t have this modem and i am never using kiss mode, but reading quickly the IIpro user manual pdf, i didn’t found any references to any « kiss mode memorised parameters »…? As Curt mentioned-it, you should try to create your own configuration string file out of the XML script info and test?
73 de Cyril - DF1CHB/AM - F1MHV/M > Le 14 juin 2017 à 09:30, Menga <[email protected]> a écrit : > > Hi Cyril, > In fact I'm well aware of the RPR manual. I started RPR on windows with > APRSIS32 and configured the modem by those XML scripts found in the manual, > plus the help by Demetre SV1UY and Jeremy N1ZZZ. > The problem started when I decided to move to raspberry pi and linux, and > hence Xastir. > I'm still puzzled that without any configuration the SCS PTCII works on > Xastir. I have a doubt: as I previously was using the modem with APRSIS32, > the modem, even with switchs off and on, still retains the previous > configuration. May it be possible? > Giuseppe > IZ1GCL > > -----Messaggio originale----- From: F1MHV > Sent: Wednesday, June 14, 2017 8:37 AM > To: Xastir - APRS client software discussion > Subject: Re: [Xastir] Xastir on raspberrypi to SCS PTCIIpro for Robustpacket > Radio > > http://robust-packet.net/Robust-Packet-Network-Manual.pdf page 11 > >> Le 13 juin 2017 à 09:12, F1MHV <[email protected]> a écrit : >> >> Guiseppe, >> >> Dig into this website http://robust-packet.net/ it's full of infos about >> config and son on... >> >> 73 de Cyril >> >>> Le 13 juin 2017 à 08:57, Menga <[email protected]> a écrit : >>> >>> Dear friends, >>> I was successful to install Xastir on a raspberry pi 3 and configurate it >>> to a SCS PTCIIpro modem for HF Robust Packet Radio. >>> Configuration to the modem was simply through KISS mode. >>> The success was demonstated by the number of stations appearing on the >>> screen received by HF (no internet connection), by the presence and update >>> of my station on aprs.fi and by an exchange of messages with a friend. >>> Only one thing put a shadow on this picture: >>> Usually the display of the SCS PTC when in KISS mode shows KISS. In this >>> case it remained in STBY (stand by) even if it worked correctly. >>> I don’t know much about preloading and postloading configuration scripts, >>> as well as timing in the configuration of KISS mode (I left the standard >>> values found in the configuration window). >>> Have some of you experience to configurate a SCS PTC modem with Xastir, and >>> can give me a suggestion? >>> Giuseppe >>> IZ1GCL _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
