I have added my user to the dialer and uucp groups and that does not help.
Greg On 1/20/07 3:50 PM, "Greg Eigsti" <[EMAIL PROTECTED]> wrote: > I am trying to get Xastir to use a serial TNC (D700) and am getting the > following error trying to open my serial port: > > Interface Error! Error opening interface 2 Hard fail > > My Xastir serial TNC parameters look like: > TNC port: /dev/cuad0 > Port Settings: 9600 bps > Port Style: 8,N,1 > Igate Options: Allow RF to Inet traffic ONLY > Path 1: WIDE1-1 > Path 2: WIDE2-1 > Igate -> RF path: WIDE2-1 (auto-generated by Xastir) > Using tnc-startup.d700 and tnc-stop.d700 (appropriately edited) > > I can communicate with the D700 using the following cmd - I can both change > settings as well as display incoming RF packets... > > sudo cu -l/dev/cuad0 -s9600 > > I am thinking that this is a permissions issue for /dev/cuad0 but am a bit > unsure about just chmod'ing it willy nilly. Should I execute the following > chmod command to proceed? I am familiar with chmod'ing files but not > devices - don't want to mess anything up! > > chmod 4511 /dev/cuad0 > > Help?!?!? > > Thanks! > Greg > KD7UBJ > > > > _______________________________________________ > Xastir mailing list > [email protected] > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir > _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
