> they're discussed in the "INSTALL" document. Of course! I read the wiki - that has to count for something.
Thanks for the help - it is working now! The addition of my user to the dialer/uucp group was not showing up when I executed the "id" command. So I rebooted and all was well with the world. Following your dialer group advice I removed myself from the uucp group (now am only a part of dialer group) and all is good. Thanks! Greg On 1/20/07 4:21 PM, "Tom Russo" <[EMAIL PROTECTED]> wrote: > On Sat, Jan 20, 2007 at 03:50:08PM -0800, we recorded a bogon-computron > collision of the <[EMAIL PROTECTED]> flavor, containing: >> I am trying to get Xastir to use a serial TNC (D700) and am getting the >> following error trying to open my serial port: >> >> Interface Error! Error opening interface 2 Hard fail >> >> My Xastir serial TNC parameters look like: >> TNC port: /dev/cuad0 >> Port Settings: 9600 bps >> Port Style: 8,N,1 >> Igate Options: Allow RF to Inet traffic ONLY >> Path 1: WIDE1-1 >> Path 2: WIDE2-1 >> Igate -> RF path: WIDE2-1 (auto-generated by Xastir) >> Using tnc-startup.d700 and tnc-stop.d700 (appropriately edited) >> >> I can communicate with the D700 using the following cmd - I can both change >> settings as well as display incoming RF packets... >> >> sudo cu -l/dev/cuad0 -s9600 >> >> I am thinking that this is a permissions issue for /dev/cuad0 but am a bit >> unsure about just chmod'ing it willy nilly. Should I execute the following >> chmod command to proceed? I am familiar with chmod'ing files but not >> devices - don't want to mess anything up! >> >> chmod 4511 /dev/cuad0 > > There are a couple of approaches, they're discussed in the "INSTALL" document. > > My approach (used on FreeBSD and Ubuntu) is to have a group for such things > in /etc/group. For example, "dialer" on free BSD and "dialout" on Ubuntu. > This group is given permission to read and write the device. Then add > yourself > to the group. > > So, for example, there'd be a line in /etc/group like this: > dialer:*:68:russo > and /dev/cuaa0 (which is the BSD version of /dev/cuad0) has permissions: > crw-rw---- 1 uucp dialer 240, 128 Jan 14 22:46 /dev/cuaa0 > > (i.e., do: > chown :dialer /dev/cuaa0 > chmod g+rw /dev/cuaa0 > on BSD, or something similar on your linux system) > > There are other approaches, but I don't think the chmod you're suggesting is > the one you want. > _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
