I use it... but not a multiport tnc Perhaps the following may not be applicable for multiport I use Slackware
Is ax25 compiled in your kernel or using modules? Do you have your /etc/ax25/axports file set up? # /etc/ax25/axports # # The format of this file is: # name callsign speed paclen window description # kisstnc va7gq 9600 255 2 144.390 Mhz (1200 bps) Do you have your /etc/rc.d/rc.local set up? # Add the kissattach command to configure the ax25 port # and use a fictious ip address for the port and ensure it is out of your network /usr/sbin/kissattach /dev/ttyS2 kisstnc 192.169.100.100 # Set up the radio & tnc parameters /usr/sbin/kissparms -p kisstnc -t 300 -s 100 -r 25 Do you have your tnc in kiss mode? Have you tried the <listen> command from a term? Any activity? There may be other things or other ways to do it, but this may be start. It works for me for a single port. ...73 Tom On Monday 26 February 2007 10:38, Kevin Hogan wrote: > Fedora Core 5 with Xastir 1.8.2 > > Trying to get Debian 3.1r0 (sarge) with ax25 for multi port TNC. > No luck on mkiss set up yet. > > Is anyone running Xastir with ax25? > > > Kevin _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
