Tom ve7did wrote:
I use it... but not a multiport tnc
Perhaps the following may not be applicable for multiport
I use Slackware
Is ax25 compiled in your kernel or using modules?
Do you have your /etc/ax25/axports file set up?
# /etc/ax25/axports
#
# The format of this file is:
# name callsign speed paclen window description
#
kisstnc va7gq 9600 255 2 144.390 Mhz (1200 bps)
Do you have your /etc/rc.d/rc.local set up?
# Add the kissattach command to configure the ax25 port
# and use a fictious ip address for the port and ensure it is out of your
network
/usr/sbin/kissattach /dev/ttyS2 kisstnc 192.169.100.100
# Set up the radio & tnc parameters
/usr/sbin/kissparms -p kisstnc -t 300 -s 100 -r 25
A ptty (psuedo tty) port is first required for a multiport TNC,
according to the HOWTO. It then sets up the two KISS ports that are
configured separately, just like standard KISS ports. Applications talk
to the two psuedo KISS ports.
I don't have a multiport TNC but the docs certainly cover that
situation. Have a look at Jeff Tranter's HOWTO
Do you have your tnc in kiss mode?
Have you tried the <listen> command from a term?
Any activity?
There may be other things or other ways to do it, but this may be start. It
works for me for a single port.
...73 Tom
On Monday 26 February 2007 10:38, Kevin Hogan wrote:
Fedora Core 5 with Xastir 1.8.2
Trying to get Debian 3.1r0 (sarge) with ax25 for multi port TNC.
No luck on mkiss set up yet.
Is anyone running Xastir with ax25?
Kevin
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Ray vk2tv
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
