Here are the steps:
1. define the ip addresses for the nodes to be installed in /etc/hosts
file on the management node.
2. make dynamicrange a empty string in the networks table for the network
the nodes are in.
3. run makedns if the mn is the DNS server
4. run makedhcp -d <noderange> to remove the old entries in the dhcp lease
file.
5. run makeshcp <noderange> to add the nodes back.
6. nodeset <noderange> <install or netboot>
7 you can start install the nodes. The nodes will take the static ip
defined for them in the /etc/hosts file on the mn.
Hope it helps.
Ling Gao
Poughkeepsie Unix Development Lab
IBM Systems and Technology Group
Internal: T/L 293-5692
External: [email protected], 845-433-5692
"I never worry about the future. It comes soon enough." --- Albert
Einstein
From: "m13601078155" <[email protected]>
To: "xcat-user" <[email protected]>
Date: 11/15/2011 08:12 AM
Subject: [xcat-user] IP address is dhcp?
When I installed the server by the xCAT 2.0 , the server's IP address
still is dhcp in the /etc/sysconfig/network-scripts/ifcfg-eth0.
I want to know how to set up the static IP address by xCAT during
installing .
Thanks.
2011-11-15 21:03:20
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
