Thanks
2011-11-15 22:16:26
发件人： Ling Gao
发送时间： 2011-11-15 22:15:21
收件人： xCAT Users Mailing list
抄送： xCAT Users Mailing list
主题： Re: [xcat-user] IP address is dhcp?
Sorry, I take it back. As long as you have static ip defined in the /etc/hosts
file and run makedhcp, the lease file will have the static ip addresses for the
nodes. Please make sure the dynamicrange does not overlap with the static ip
addresses
Ling
Ling Gao
Poughkeepsie Unix Development Lab
IBM Systems and Technology Group
Internal: T/L 293-5692
External: [email protected], 845-433-5692
"I never worry about the future. It comes soon enough." --- Albert Einstein
From: "m13601078155" <[email protected]>
To: "xCAT Users Mailing list" <[email protected]>
Date: 11/15/2011 08:49 AM
Subject: Re: [xcat-user] IP address is dhcp?
make dynamicrange a empty string in the networks table for the network the
nodes are in.
why?
2011-11-15 21:46:59
发件人： Ling Gao
发送时间： 2011-11-15 21:36:26
收件人： xCAT Users Mailing list
抄送： xcat-user
主题： Re: [xcat-user] IP address is dhcp?
Here are the steps:
1. define the ip addresses for the nodes to be installed in /etc/hosts file on
the management node.
2. make dynamicrange a empty string in the networks table for the network the
nodes are in.
3. run makedns if the mn is the DNS server
4. run makedhcp -d <noderange> to remove the old entries in the dhcp lease
file.
5. run makeshcp <noderange> to add the nodes back.
6. nodeset <noderange> <install or netboot>
7 you can start install the nodes. The nodes will take the static ip defined
for them in the /etc/hosts file on the mn.
Hope it helps.
Ling Gao
Poughkeepsie Unix Development Lab
IBM Systems and Technology Group
Internal: T/L 293-5692
External: [email protected], 845-433-5692
"I never worry about the future. It comes soon enough." --- Albert Einstein
From: "m13601078155" <[email protected]>
To: "xcat-user" <[email protected]>
Date: 11/15/2011 08:12 AM
Subject: [xcat-user] IP address is dhcp?
When I installed the server by the xCAT 2.0 , the server's IP address still is
dhcp in the /etc/sysconfig/network-scripts/ifcfg-eth0.
I want to know how to set up the static IP address by xCAT during installing .
Thanks.
2011-11-15 21:03:20
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
