make dynamicrange a empty string in the networks table for the network the
nodes are in.
why?
2011-11-15 21:46:59
发件人： Ling Gao
发送时间： 2011-11-15 21:36:26
收件人： xCAT Users Mailing list
抄送： xcat-user
主题： Re: [xcat-user] IP address is dhcp?
Here are the steps:
1. define the ip addresses for the nodes to be installed in /etc/hosts file on
the management node.
2. make dynamicrange a empty string in the networks table for the network the
nodes are in.
3. run makedns if the mn is the DNS server
4. run makedhcp -d <noderange> to remove the old entries in the dhcp lease
file.
5. run makeshcp <noderange> to add the nodes back.
6. nodeset <noderange> <install or netboot>
7 you can start install the nodes. The nodes will take the static ip defined
for them in the /etc/hosts file on the mn.
Hope it helps.
Ling Gao
Poughkeepsie Unix Development Lab
IBM Systems and Technology Group
Internal: T/L 293-5692
External: [email protected], 845-433-5692
"I never worry about the future. It comes soon enough." --- Albert Einstein
From: "m13601078155" <[email protected]>
To: "xcat-user" <[email protected]>
Date: 11/15/2011 08:12 AM
Subject: [xcat-user] IP address is dhcp?
When I installed the server by the xCAT 2.0 , the server's IP address still is
dhcp in the /etc/sysconfig/network-scripts/ifcfg-eth0.
I want to know how to set up the static IP address by xCAT during installing .
Thanks.
2011-11-15 21:03:20
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
