hi,lissa and everyone:
today, I still have the problem like what I had sent the mail about the
upadate cmos
before,I fall across a problem like this: when I update the CMOS of system
x3650 m4 ,the node doesn't on when I type command :"rpower node01 reset"
today,I update the CMOS of system x3550 M4 ,the problem still happen.
so,if everyone who have way to solve this problem ,please share with me
,thanks very much ,much !
tips: this is the CMOS setting file: loaddefault BootOrder
loaddefault uEFI
set Processors.Hyper-Threading Disable
set BootOrder.BootOrder "Legacy Only=PXE Network=Hard Disk 0"
set DevicesandIOPorts.Com1FlowControl Hardware
set DevicesandIOPorts.Com1TerminalEmulation VT100
set DevicesandIOPorts.Com1ActiveAfterBoot Enable
set DevicesandIOPorts.SerialPortSharing Enable
set DevicesandIOPorts.SerialPortAccessMode Dedicated
set DevicesandIOPorts.RemoteConsole Enable
set DevicesandIOPorts.Slot1PCIeSpeed Gen3
set DevicesandIOPorts.Slot2PCIeSpeed Gen3
set DevicesandIOPorts.Slot3PCIeSpeed Gen3
management node OS: RHELS6.2
XCAT firmware : 2.7.1
thanks again! ------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
