Voila. That made it! Never suspected of that setting. To clear the
thread up, this kernel panic problem was not related to the management node
reboot, that actually never made any sense but was mentioned. The kernel
panic is still an odd behavior given this specific parameter, no?
On Tue, Jan 22, 2013 at 5:02 PM, Tom Schwaller <[email protected]> wrote:
> Hi all,
> just had the same problem with a brand new installation (xcat master on
> rhel6.3 and using pre xcat-2.8) togeher with HS21 and HS22
> blades. When you delete
>
> console=tty0 console=ttyS1,115200n8r
>
> it works. I basically removed the console server configuration afterwards,
> but I wonder if there is no better solution. I got
> console server working with half of the config above, but I'd really like
> to see the whole boot process with the BladeCenter Remote Console
> AND rcons. Right now I am stuck with that but at least happy I got rid of
> the crashes while installing :-)
>
> Hope this helps at least to get the ball rolling again..
>
> Tom
>
> ----
> Gesendet: Dienstag, 22. Januar 2013 um 22:28 Uhr
> Von: "Jarrod B Johnson" <[email protected]>
> An: "xCAT Users Mailing list" <[email protected]>
> Betreff: Re: [xcat-user] kernel panic
> cat /tftpboot/xcat/xnba/nodes/xclustn5
>
> [root@xcat6 ~]# md5sum /tftpboot/xcat/centos6.3/x86_64/compute/initrd.img
> 626bf56fa895e42660e142e0018d91aa
> /tftpboot/xcat/centos6.3/x86_64/compute/initrd.img
> [root@xcat6 ~]# md5sum /tftpboot/xcat/centos6.3/x86_64/compute/vmlinuz
> ee7b809b72945291749c6e38709605c4
> /tftpboot/xcat/centos6.3/x86_64/compute/vmlinuz
>
> What type of system is it? I note ttyS1,115200 being indicated, suggesting
> that *if* IBM, then an HS22 or similar/newer BladeCenter server?
>
> Can remove 'quiet' from the xnba nodes config file, might give more hint
> in rcons...
>
> Russell Jones ---01/22/2013 03:57:42 PM---I'm really stumped on this one
> :) As a shot in the dark, can you try changing noderes.netboot to be
>
> From: Russell Jones <[email protected]>
> To: "Jesus R. Camou" <[email protected]>, xCAT Users Mailing list <
> [email protected]>,
> Date: 01/22/2013 03:57 PM
> Subject: Re: [xcat-user] kernel panic
> ------------------------------------------------------------
>
>
> I'm really stumped on this one :)
>
> As a shot in the dark, can you try changing noderes.netboot to be pxe
> instead of xnba? Then re-run makedhcp and nodeset $node install. See if
> you get anything different in the output.
>
> The other step you can try is taking "quiet" out of the kcmdline to see
> if any additional verbose output is presented that can help diagnose the
> issue.
>
>
> On 1/22/2013 1:04 PM, Jesus R. Camou wrote:
> > Hi Russell,
> >
> > Yes, oddly they were actually kickstarted (and installed) via xCAT
> > provisioning. This problem is happening on already provisioned
> > metals, as well as not yet installed ones. I'm testing with the
> > following scenario:
> >
> > xclustn4 (already provisioned with centos63, boots up, looks good
> > except that it kernel panics while trying to re-install)
> > xclustn5 (never provisioned, no OS, kernel panics while trying to
> > install)
> >
> > Couldn't find any useful information either by google'n the panic
> > problem.
> >
> > Here's lsdef for these two nodes:
> >
> > [root@xcat ~]# lsdef xclustn4
> > Object name: xclustn4
> > arch=x86_64
> > bmc=10.32.1.154
> > bmcpassword=PASSW0RD
> > bmcport=0
> > bmcusername=USERID
> > chain=runcmd=bmcsetup,install
> > currchain=boot
> > currstate=install centos63-x86_64-compute
> > groups=compute,ipmi,all,xclustn,metal
> > initrd=xcat/centos63/x86_64/initrd.img
> > installnic=eth0
> > ip=10.32.0.154
> > kcmdline=quiet repo=http://10.32.0.6/install/centos63/x86_64/
> > ks=http://10.32.0.6/install/autoinst/xclustn4 ksdevice=eth0 cmdline
> > console=tty0 console=ttyS1,115200n8r
> > kernel=xcat/centos63/x86_64/vmlinuz
> > mac=00:1b:24:93:78:16
> > mgt=ipmi
> > netboot=xnba
> > nfsserver=10.32.0.6
> > os=centos63
> > postbootscripts=otherpkgs
> > postscripts=syslog,remoteshell,syncfiles
> > primarynic=eth0
> > profile=compute
> > provmethod=install
> > serial=To Be Filled By O.E.M.
> > serialflow=hard
> > serialport=1
> > serialspeed=115200
> > status=booting
> > statustime=01-21-2013 09:49:47
> > supportedarchs=x86,x86_64
> > switch=switch1
> > switchport=25
> > tftpserver=10.32.0.6
> >
> >
> > [root@xcat ~]# lsdef xclustn5
> > Object name: xclustn5
> > arch=x86_64
> > bmc=10.32.1.155
> > bmcpassword=<some-passwd>
> > bmcport=0
> > bmcusername=<some-user>
> > chain=runcmd=bmcsetup,install
> > currchain=boot
> > currstate=install centos63-x86_64-compute
> > groups=compute,ipmi,all,xclustn,metal
> > initrd=xcat/centos63/x86_64/initrd.img
> > installnic=eth0
> > ip=10.32.0.155
> > kcmdline=quiet repo=http://10.32.0.6/install/centos63/x86_64/
> > ks=http://10.32.0.6/install/autoinst/xclustn5 ksdevice=eth0 cmdline
> > console=tty0 console=ttyS1,115200n8r
> > kernel=xcat/centos63/x86_64/vmlinuz
> > mac=00:1b:24:93:b3:c0
> > mgt=ipmi
> > netboot=xnba
> > nfsserver=10.32.0.6
> > os=centos63
> > postbootscripts=otherpkgs
> > postscripts=syslog,remoteshell,syncfiles
> > primarynic=eth0
> > profile=compute
> > provmethod=install
> > serial=To Be Filled By O.E.M.
> > serialflow=hard
> > serialport=1
> > serialspeed=115200
> > status=installing
> > statustime=01-20-2013 15:32:54
> > supportedarchs=x86_64
> > switch=switch1
> > switchport=28
> > tftpserver=10.32.0.6
> >
> > And some tabdumps, let me know if I've missed some important ones.
> >
> > [root@xcat ~]# tabdump networks
> >
> #netname,net,mask,mgtifname,gateway,dhcpserver,tftpserver,nameservers,ntpservers,logservers,dynamicrange,nodehostname,ddnsdomain,vlanid,domain,comments,disable
> >
> >
> "10_32_0_0-255_255_0_0","10.32.0.0","255.255.0.0","eth0","10.32.0.1","10.32.0.6","10.32.0.6","10.32.0.6",,,"10.32.0.60-10.32.0.80",,,,,,
> >
> >
> > [root@xcat ~]# tabdump nodelist
> >
> #node,groups,status,statustime,appstatus,appstatustime,primarysn,hidden,comments,disable
> >
> > "xclustn0","compute,ipmi,all,xclustn,metal",,,,,,,,
> > "xclustn1","compute,ipmi,all,xclustn,metal",,,,,,,,
> > "xclustn2","compute,ipmi,all,xclustn,metal",,,,,,,,
> > "xclustn3","compute,ipmi,all,xclustn,metal",,,,,,,,
> > "xclustn4","compute,ipmi,all,xclustn,metal","booting","01-21-2013
> > 09:49:47",,,,,,
> > "xclustn5","compute,ipmi,all,xclustn,metal","installing","01-20-2013
> > 15:32:54",,,,,,
> > "switch1","sw",,,,,,,,
> > "dumpster","storage",,,,,,,,
> >
> > [root@xcat ~]# tabdump nodetype
> > #node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable
> > "xclustn4","centos63","x86_64","compute","install","x86,x86_64",,,
> > "xclustn5","centos63","x86_64","compute","install","x86_64",,,
> >
> > [root@xcat ~]# tabdump noderes
> >
> #node,servicenode,netboot,tftpserver,tftpdir,nfsserver,monserver,nfsdir,installnic,primarynic,discoverynics,cmdinterface,xcatmaster,current_osimage,next_osimage,nimserver,routenames,comments,disable
> >
> > "compute",,"xnba","10.32.0.6",,"10.32.0.6",,,"eth0","eth0",,,,,,,,,
> > "xclustn4",,,,,,,,,,,,,,,,,,
> > "xclustn0",,,,,,,,,,,,,,,,,,
> > "xclustn5",,,,,,,,,,,,,,,,,,
> > "xclustn1",,,,,,,,,,,,,,,,,,
> > "xclustn3",,,,,,,,,,,,,,,,,,
> > "xclustn2",,,,,,,,,,,,,,,,,,
> >
> > Thanks!
> >
> > On 01/21/2013 08:08 PM, Russell Jones wrote:
> >> Can you provide an lsdef of a node that is failing to boot?
> >>
> >> Can you also provide a tabdump of the standard xcat tables? (network,
> >> nodelist, nodetype, etc). A single line from each that shows the
> >> configuration tied to what a failing node is using is fine.
> >>
> >> Also, I know you said this happened after rebooting, but humor me -
> >> these nodes were running 6.3 successfully prior to your MN being
> >> rebooted? Everything I have ran across on my Google searches of the
> >> error messages you are seeing are tied to either hardware issues or
> >> drivers missing.
> >>
> >>
> >>
> >> On 1/21/2013 3:37 PM, Jesus R. Camou wrote:
> >>> Reinstalled the management node on a different machine, imported
> >>> back same xcat database and config. Still same behaviour, kernel
> >>> panics before triggering installation (after loading initrd.img), so
> >>> it must be something else. The weird part is that this was working
> >>> and decided to stop working all of the sudden. Don't remember
> >>> changing anything significant either.
> >>>
> >>> On Mon, Jan 21, 2013 at 12:04 PM, Jesus R. Camou <[email protected]
> >>> <mailto:[email protected][[email protected]]>> wrote:
> >>>
> >>> Made sure no other interfaces are using this ip, cleared the dhcpd
> >>> leases and rediscovered the node. Same results, here's the mn's
> >>> /var/log/messages:
> >>>
> >>> Jan 21 12:01:20 xcat xCAT: xCAT: Allowing makedhcp to xclustn5 -d
> >>> for root from localhost
> >>> Jan 21 12:03:23 xcat dhcpd: DHCPDISCOVER from 00:1b:24:93:b3:c0
> >>> via eth0
> >>> Jan 21 12:03:24 xcat dhcpd: DHCPOFFER on 10.32.0.70 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:25 xcat dhcpd: DHCPREQUEST for 10.32.0.70 (10.32.0.5)
> >>> from 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:25 xcat dhcpd: DHCPACK on 10.32.0.70 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:25 xcat in.tftpd[9282]: RRQ from 10.32.0.70 filename
> >>> xcat/xnba.kpxe
> >>> Jan 21 12:03:25 xcat in.tftpd[9282]: tftp: client does not accept
> >>> options
> >>> Jan 21 12:03:25 xcat in.tftpd[9283]: RRQ from 10.32.0.70 filename
> >>> xcat/xnba.kpxe
> >>> Jan 21 12:03:25 xcat dhcpd: DHCPDISCOVER from 00:1b:24:93:b3:c0
> >>> via eth0
> >>> Jan 21 12:03:26 xcat dhcpd: DHCPOFFER on 10.32.0.66 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:26 xcat dhcpd: DHCPREQUEST for 10.32.0.66 (10.32.0.5)
> >>> from 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:26 xcat dhcpd: DHCPACK on 10.32.0.66 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:51 xcat dhcpd: DHCPDISCOVER from 00:1b:24:93:b3:c0
> >>> via eth0
> >>> Jan 21 12:03:51 xcat dhcpd: DHCPOFFER on 10.32.0.70 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:51 xcat dhcpd: DHCPREQUEST for 10.32.0.70 (10.32.0.5)
> >>> from 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:51 xcat dhcpd: DHCPACK on 10.32.0.70 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:03:51 xcat xCAT: xCAT: Allowing getcredentials x509cert
> >>> Jan 21 12:04:02 xcat xCAT: xcatd: Processing discovery request
> >>> from 10.32.0.70
> >>> Jan 21 12:04:04 xcat xCAT node discovery: xclustn5 has been
> >>> discovered
> >>> Jan 21 12:04:07 xcat dhcpd: DHCPRELEASE of 10.32.0.70 from
> >>> 00:1b:24:93:b3:c0 via eth0 (found)
> >>> Jan 21 12:04:09 xcat dhcpd: DHCPDISCOVER from 00:1b:24:93:b3:c0
> >>> via eth0
> >>> Jan 21 12:04:09 xcat dhcpd: DHCPOFFER on 10.32.0.155 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:04:09 xcat dhcpd: DHCPREQUEST for 10.32.0.155
> >>> (10.32.0.5) from 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:04:09 xcat dhcpd: DHCPACK on 10.32.0.155 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:04:27 xcat xCAT: xCAT: Allowing getcredentials x509cert
> >>> from xclustn5
> >>> Jan 21 12:04:28 xcat xCAT: xCAT: Allowing nextdestiny for xclustn5
> >>> from xclustn5
> >>> Jan 21 12:04:36 xcat xCAT: xCAT: Allowing getbmcconfig for
> >>> xclustn5 from xclustn5
> >>> Jan 21 12:07:19 xcat dhcpd: DHCPDISCOVER from 00:1b:24:93:b3:c0
> >>> via eth0
> >>> Jan 21 12:07:19 xcat dhcpd: DHCPOFFER on 10.32.0.155 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:07:21 xcat dhcpd: DHCPREQUEST for 10.32.0.155
> >>> (10.32.0.5) from 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:07:21 xcat dhcpd: DHCPACK on 10.32.0.155 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:07:21 xcat in.tftpd[9391]: RRQ from 10.32.0.155 filename
> >>> xcat/xnba.kpxe
> >>> Jan 21 12:07:21 xcat in.tftpd[9391]: tftp: client does not accept
> >>> options
> >>> Jan 21 12:07:21 xcat in.tftpd[9392]: RRQ from 10.32.0.155 filename
> >>> xcat/xnba.kpxe
> >>> Jan 21 12:07:21 xcat dhcpd: uid lease 10.32.0.66 for client
> >>> 00:1b:24:93:b3:c0 is duplicate on eth0
> >>> Jan 21 12:07:21 xcat dhcpd: DHCPDISCOVER from 00:1b:24:93:b3:c0
> >>> via eth0
> >>> Jan 21 12:07:21 xcat dhcpd: DHCPOFFER on 10.32.0.155 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:07:21 xcat dhcpd: uid lease 10.32.0.66 for client
> >>> 00:1b:24:93:b3:c0 is duplicate on eth0
> >>> Jan 21 12:07:21 xcat dhcpd: DHCPREQUEST for 10.32.0.155
> >>> (10.32.0.5) from 00:1b:24:93:b3:c0 via eth0
> >>> Jan 21 12:07:21 xcat dhcpd: DHCPACK on 10.32.0.155 to
> >>> 00:1b:24:93:b3:c0 via eth0
> >>>
> >>>
> >>>
> >>> On Mon, Jan 21, 2013 at 8:27 AM, Russell Jones
> >>> <[email protected] <mailto:[email protected][
> [email protected]]>> wrote:
> >>>
> >>> Jan 21 01:16:09 xcat dhcpd: uid lease 10.32.0.66 for client
> >>> 00:1b:24:93:b3:c0 is duplicate on eth0
> >>>
> >>> I haven't seen that before. What's in your leases file? Any
> >>> duplicates for different macs?
> >>>
> >>> Anything else responding to pings on that IPthat shouldn't be?
> >>>
> >>>
> >>>
> >>>
> >>> On 1/21/2013 3:10 AM, Jesus R. Camou wrote:
> >>>> Jan 21 01:16:09 xcat dhcpd: uid lease 10.32.0.66 for client
> >>>> 00:1b:24:93:b3:c0 is duplicate on eth0
> >>>
> >>>
> >>>
> ------------------------------------------------------------------------------
> >>>
> >>> Master Visual Studio, SharePoint, SQL, ASP.NET
> >>> <http://ASP.NET[http://ASP.NET]>, C# 2012, HTML5, CSS,
> >>> MVC, Windows 8 Apps, JavaScript and much more. Keep your
> >>> skills current
> >>> with LearnDevNow - 3,200 step-by-step video tutorials by
> >>> Microsoft
> >>> MVPs and experts. SALE $99.99 this month only -- learn more at:
> >>>
> http://p.sf.net/sfu/learnmore_122412[http://p.sf.net/sfu/learnmore_122412]
> >>> _______________________________________________
> >>> xCAT-user mailing list
> >>> [email protected]
> >>> <mailto:[email protected][
> [email protected]]>
> >>>
> https://lists.sourceforge.net/lists/listinfo/xcat-user[https://lists.sourceforge.net/lists/listinfo/xcat-user]
> >>>
> >>>
> >>>
> >>>
> >>> -- Jesus R. Camou @ nearnix
> >>> UNIX Engineering - [email protected] <mailto:[email protected][
> [email protected]]>
> >>> US:(310)945-5360 MEX:+52(662)299-7503
> >>>
> >>>
> >>>
> >>>
> >>> --
> >>> Jesus R. Camou @ nearnix
> >>> UNIX Engineering - [email protected] <mailto:[email protected][
> [email protected]]>
> >>> US:(310)945-5360 MEX:+52(662)299-7503
> >>>
> >>>
> >>>
> >>>
> ------------------------------------------------------------------------------
> >>>
> >>> Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
> >>> MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current
> >>> with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft
> >>> MVPs and experts. SALE $99.99 this month only -- learn more at:
> >>>
> http://p.sf.net/sfu/learnmore_122412[http://p.sf.net/sfu/learnmore_122412]
> >>>
> >>>
> >>> _______________________________________________
> >>> xCAT-user mailing list
> >>> [email protected]
> >>>
> https://lists.sourceforge.net/lists/listinfo/xcat-user[https://lists.sourceforge.net/lists/listinfo/xcat-user]
> >>
> >>
> >>
> >>
> >>
> ------------------------------------------------------------------------------
> >>
> >> Master SQL Server Development, Administration, T-SQL, SSAS, SSIS, SSRS
> >> and more. Get SQL Server skills now (including 2012) with LearnDevNow -
> >> 200+ hours of step-by-step video tutorials by Microsoft MVPs and
> >> experts.
> >> SALE $99.99 this month only - learn more at:
> >>
> http://p.sf.net/sfu/learnmore_122512[http://p.sf.net/sfu/learnmore_122512]
> >>
> >>
> >> _______________________________________________
> >> xCAT-user mailing list
> >> [email protected]
> >>
> https://lists.sourceforge.net/lists/listinfo/xcat-user[https://lists.sourceforge.net/lists/listinfo/xcat-user]
> >
>
>
>
> ------------------------------------------------------------------------------
> Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
> MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current
> with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft
> MVPs and experts. ON SALE this month only -- learn more at:
> http://p.sf.net/sfu/learnnow-d2d[http://p.sf.net/sfu/learnnow-d2d]
> _______________________________________________
> xCAT-user mailing list
> [email protected]
>
> https://lists.sourceforge.net/lists/listinfo/xcat-user[https://lists.sourceforge.net/lists/listinfo/xcat-user]
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
> MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current
> with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft
> MVPs and experts. ON SALE this month only -- learn more at:
> http://p.sf.net/sfu/learnnow-d2d
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
--
Jesus R. Camou @ nearnix
UNIX Engineering - [email protected]
US:(310)945-5360 MEX:+52(662)299-7503
------------------------------------------------------------------------------
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current
with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft
MVPs and experts. ON SALE this month only -- learn more at:
http://p.sf.net/sfu/learnnow-d2d
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
