Hi Lissa, Below is an output os some of the commands specified
# updatenode service -k
Enter the password for the userid: root on the node where the ssh keys
will be updated:
Error: Command failed: xdsh. Error message: mkdir:blue101 has
error,1:TIMEOUTcopykeys:blue101 has error,1:TIMEOUT/usr/bin/ssh setup is
complete.return code = 0.
blue101: Setup ssh keys has completed.
blue102: Setup ssh keys has completed.
blue103: Setup ssh keys has completed.
blue103: Fri Apr 12 12:55:26 BST 2013 Running postscript: remoteshell
blue103:
blue103:
blue103: Postscript: remoteshell exited with code 0
blue103: Postscript: remoteshell exited with code 0
blue103: Redeliver security files has completed.
blue103: Redeliver security files has completed.
blue103: Remote_command_successful
blue101: Fri Apr 12 12:55:43 BST 2013 Running postscript: remoteshell
blue101:
blue101:
blue102: Fri Apr 12 12:55:50 BST 2013 Running postscript: remoteshell
blue101: Postscript: remoteshell exited with code 0
blue101: Postscript: remoteshell exited with code 0
blue101: Redeliver security files has completed.
blue101: Redeliver security files has completed.
blue101: Remote_command_successful
blue102:
blue102:
blue102: Postscript: remoteshell exited with code 0
blue102: Postscript: remoteshell exited with code 0
blue102: Redeliver security files has completed.
blue102: Redeliver security files has completed.
blue102: Remote_command_successful
# xdsh service lsxcatd -a
blue103: Version 2.8 (svn r15205, built Mon Feb 18 17:01:27 EST 2013)
blue103: This is a Service Node
blue103: cfgloc=mysql:dbname=xcatdb;host=<snip>|xcatadmin
blue103: dbengine=mysql
blue103: dbname=xcatdb
blue103: dbhost=<snip>
blue103: dbadmin=xcatadmin
blue101: Version 2.8 (svn r15205, built Mon Feb 18 17:01:27 EST 2013)
blue101: This is a Service Node
blue101: cfgloc=mysql:dbname=xcatdb;host=<snip>|xcatadmin
blue101: dbengine=mysql
blue101: dbname=xcatdb
blue101: dbhost=<snip>
blue101: dbadmin=xcatadmin
blue102: Version 2.8 (svn r15205, built Mon Feb 18 17:01:27 EST 2013)
blue102: This is a Service Node
blue102: cfgloc=mysql:dbname=xcatdb;host=<snip>|xcatadmin
blue102: dbengine=mysql
blue102: dbname=xcatdb
blue102: dbhost=<snip>
blue102: dbadmin=xcatadmin
# lsdef blue101
Object name: blue101
addkcmdline=mlx4_en.blacklist=yes
arch=x86_64
bmc=bmcblue101
bmcport=0
chain=runimage=http://<snip>/install/ocf/asu.tgz,runcmd=bmcsetup,standby
cons=ipmi
currchain=boot
currstate=boot
dhcpinterfaces=eth0
groups=ipmi,service,C4
initrd=xcat/osimage/soton-service/initrd.img
ip=<snip>
kcmdline=quiet repo=http://<snip>:80/install/rhels6.3/x86_64
ks=http://<snip>:80/install/autoinst/blue101
ksdevice=40:f2:e9:07:38:d2 cmdline console=tty0 console=ttyS0,115200
kernel=xcat/osimage/soton-service/vmlinuz
mac=40:f2:e9:07:38:d2
mgt=ipmi
mtm=7914FT1
netboot=xnba
nfsserver=<snip>
nicips=ib0!<snip>
nicnetworks=ib0!ib
nictypes=ib0!Infiniband
ondiscover=nodediscover
os=rhels6.3
otherinterfaces=ibblue101:<snip>,bmcblue101:<snip>
postbootscripts=otherpkgs,mlnxofed,gpfs_updates,confignics
postscripts=syslog,remoteshell,syncfiles,setupntp,hardeths,servicenode
power=ipmi
profile=service
provmethod=soton-service
serial=06LMZG2
serialport=0
serialspeed=115200
setupconserver=1
setupdhcp=1
setupnameserver=1
setupnfs=1
setupntp=1
setuptftp=1
status=booting
statustime=04-11-2013 10:29:41
switch=switch18
switchport=29
updatestatus=synced
updatestatustime=04-12-2013 11:55:50
# lsdef -t osimage soton-service
Object name: soton-service
imagetype=linux
osarch=x86_64
osname=Linux
osvers=rhels6.3
otherpkgdir=/install/post/otherpkgs/soton-otherpkgs
otherpkglist=/install/ocf-templates/service/service.otherpkgs.pkglist
partitionfile=/install/ocf-templates/service/service.partfile
pkgdir=/install/rhels6.3/x86_64
pkglist=/install/ocf-templates/service/service.pkglist
profile=service
provmethod=install
synclists=/install/ocf-templates/service/service.synclist
--
Arif Ali
catch me on freenode IRC, username: arif-ali
On 12 April 2013 11:26, Lissa Valletta <[email protected]> wrote:
> Can you run xdsh sn[1-3 ] "lsxcatd -a" from the MN and give the output.
>
>
> Another better way to fix up keys and credentials is to run updatenode sn[1-3]
> -k. It will prompt you for the root password.
> The error you are getting usually indicates the daemon on the MN cannot
> contact the xcatd on the service node for some reason.
>
>
> lsdef sn1 output would be useful
>
> tabdump servicenode
>
>
>
>
> Lissa K. Valletta
> 8-3/B10
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
> [image: Inactive hide details for Arif Ali ---04/12/2013 06:03:32 AM---Hi
> Xiao, That is the obvious question to ask, and yes, I have do]Arif Ali
> ---04/12/2013 06:03:32 AM---Hi Xiao, That is the obvious question to ask,
> and yes, I have done that through th
>
> From: Arif Ali <[email protected]>
> To: xCAT Users Mailing list <[email protected]>
> Date: 04/12/2013 06:03 AM
> Subject: Re: [xcat-user] problem with service nodes in xCAT 2.8
> ------------------------------
>
>
>
> Hi Xiao,
>
> That is the obvious question to ask, and yes, I have done that through th
> postscripts tables, as well as running updatenode sn1+2 servicenode. This
> enables for the nodes themselves to run commands, but not able to run from
> MN
>
> Unless there is a different way of doing it in 2.8, I have done service
> nodes before, and haven't had this problem before.
>
> regards,
> Arif
>
> --
> Arif Ali
>
> catch me on freenode IRC, username: arif-ali
>
>
> On 12 April 2013 09:39, Xiao Peng Wang <*[email protected]* <[email protected]>>
> wrote:
>
> Did you create a service group and added your SNs to this group before
> the installing? There's a postscript 'servicenode' need to be run for the
> service node to configure the keys, certificates stuff.
>
> You can try to run 'updatenode sn[1-3] servicenode' to update the keys.
>
>
> Thanks
> Best Regards
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: *[email protected]* <[email protected]>
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
> Haidian District Beijing P.R.China 100193
>
> Arif Ali ---2013/04/12 08:26:22---Hi team, I am in the process of
> installing a cluster of approx 800 iDPX nodes, and
>
> From: Arif Ali <*[email protected]* <[email protected]>>
> To: xCAT-user
> <*[email protected]*<[email protected]>>,
>
> Date: 2013/04/12 08:26
> Subject: [xcat-user] problem with service nodes in xCAT 2.8
> ------------------------------
>
>
>
>
> Hi team,
>
> I am in the process of installing a cluster of approx 800 iDPX nodes,
> and we are suppose to have 4 service nodes. I have re-installed the service
> nodes several times, in my usual way, but unfortunately, I am coming to the
> same result
>
> # makedhcp -a
> Error: Unable to dispatch hierarchical sub-command to sn1:3001. This
> service node may be down or its xcatd daemon may not be responding.
> Error: Unable to dispatch hierarchical sub-command to sn2:3001. This
> service node may be down or its xcatd daemon may not be responding.
> Error: Unable to dispatch hierarchical sub-command to sn3:3001. This
> service node may be down or its xcatd daemon may not be responding.
>
> I have been trying to diagnose for 6-8 hours, and not being able to
> figure out the issue.
>
> The SN themselves can run all the xCAT commands itself, it seems there
> may be something up with the SSL connection between the MN and the SN. SSL
> is my weak point unfortunately and not sure where to start debugging.
>
> Any help on this would be very useful.
> --
> Arif Ali
>
> catch me on freenode IRC, username: arif-ali
>
> ------------------------------------------------------------------------------
> Precog is a next-generation analytics platform capable of advanced
> analytics on semi-structured data. The platform includes APIs for
> building
> apps and a phenomenal toolset for data science. Developers can use
> our toolset for easy data analysis & visualization. Get a free account!
> *
>
> **http://www2.precog.com/precogplatform/slashdotnewsletter*<http://www2.precog.com/precogplatform/slashdotnewsletter>
> _______________________________________________
> xCAT-user mailing list*
> **[email protected]* <[email protected]>*
>
> **https://lists.sourceforge.net/lists/listinfo/xcat-user*<https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> Precog is a next-generation analytics platform capable of advanced
> analytics on semi-structured data. The platform includes APIs for
> building
> apps and a phenomenal toolset for data science. Developers can use
> our toolset for easy data analysis & visualization. Get a free account!
> *
>
> **http://www2.precog.com/precogplatform/slashdotnewsletter*<http://www2.precog.com/precogplatform/slashdotnewsletter>
> _______________________________________________
> xCAT-user mailing list*
> **[email protected]* <[email protected]>*
>
> **https://lists.sourceforge.net/lists/listinfo/xcat-user*<https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
> ------------------------------------------------------------------------------
> Precog is a next-generation analytics platform capable of advanced
> analytics on semi-structured data. The platform includes APIs for building
> apps and a phenomenal toolset for data science. Developers can use
> our toolset for easy data analysis & visualization. Get a free account!
> http://www2.precog.com/precogplatform/slashdotnewsletter
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> Precog is a next-generation analytics platform capable of advanced
> analytics on semi-structured data. The platform includes APIs for building
> apps and a phenomenal toolset for data science. Developers can use
> our toolset for easy data analysis & visualization. Get a free account!
> http://www2.precog.com/precogplatform/slashdotnewsletter
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
<<graycol.gif>>
------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
