Hello,
Thanks but it didn't hel me :(
chdef node1 interface=""
1 object definitions have been created or modified.
# lsdef node1
Object name: node1
arch=x86_64
currstate=netboot SL6.3-x86_64-compute
groups=all
initrd=xcat/osimage/SL6.3-x86_64-netboot-compute/initrd-stateless.gz
installnic=
00:21:90:2F:61:CE
ip=172.21.22.71
kcmdline=imgurl=
*http://172.21.22.70:80//install/netboot/SL6.3/x86_64/compute/rootimg.gz*<http://172.21.22.70//install/netboot/SL6.3/x86_64/compute/rootimg.gz>
XCAT=!myipfn!:3001
NODE=node1 FC=yes ifname=eth0:00:21:90:2F:61:CE netdev=eth0
kernel=xcat/osimage/SL6.3-x86_64-netboot-compute/kernel
mac=00:21:90:2F:61:CE
netboot=pxe
nfsserver=172.21.22.70
nicips.ib0=192.168.1.2
nicnetworks.ib0=ib0
nictypes.ib0=Infiniband
os=SL6.3
postbootscripts=otherpkgs,configib,mkresolvconf
postscripts=syslog,remoteshell,syncfiles,otherpkgs,confignics
--ibaports=1
primarynic=00:21:90:2F:61:CE
profile=compute
provmethod=SL6.3-x86_64-netboot-compute
status=booted
statustime=12-23-2013 16:41:24
tftpserver=172.21.22.70
updatestatus=synced
updatestatustime=12-23-2013 11:57:15
#
nodeset
node1
osimage=SL6.3-x86_64-netboot-compute
# lsdef
node1
Object name: node1
arch=x86_64
currstate=netboot SL6.3-x86_64-compute
groups=all
initrd=xcat/osimage/SL6.3-x86_64-netboot-compute/initrd-stateless.gz
installnic=
00:21:90:2F:61:CE
ip=172.21.22.71
kcmdline=imgurl=
http://172.21.22.70:80//install/netboot/SL6.3/x86_64/compute/rootimg.gzXCAT=!myipfn!:3001
NODE=
node1
FC=yes ifname=
00:21:90:2F:61:CE:
00:21:90:2F:61:CE netdev=
00:21:90:2F:61:CE
kernel=xcat/osimage/SL6.3-x86_64-netboot-compute/kernel
mac=
00:21:90:2F:61:CE
netboot=pxe
nfsserver=172.21.22.70
nicips.ib0=192.168.1.2
nicnetworks.ib0=ib0
nictypes.ib0=Infiniband
os=SL6.3
postbootscripts=otherpkgs,configib,mkresolvconf
postscripts=syslog,remoteshell,syncfiles,otherpkgs,confignics
--ibaports=1
primarynic=
00:21:90:2F:61:CE
profile=compute
provmethod=SL6.3-x86_64-netboot-compute
status=booted
statustime=12-23-2013 16:41:24
tftpserver=172.21.22.70
updatestatus=synced
updatestatustime=12-23-2013 11:57:15
When node is booting I see on the screen:
*dracut: FATAL : Invalid argument for ifname=*
Bets Regards,
-- Dmitry
On 23 December 2013 23:02, Ling Gao <[email protected]> wrote:
> Can you make the interface blank?
>
> chdef node1interface="" or manually go to the mac table and blank out
> the interface attribute for node1. Then do nodeset again and redeploy the
> node. Hope it helps.
>
> Thanks,
> Ling
>
> Ling Gao
> Poughkeepsie Unix Development Lab
> IBM Systems and Technology Group
> Internal: T/L 293-5692
> External: [email protected], 845-433-5692
>
> "I never worry about the future. It comes soon enough." --- Albert
> Einstein
>
>
>
> From: Dmitry Yulov <[email protected]>
> To: [email protected],
> Date: 12/23/2013 01:47 PM
> Subject: [xcat-user] error changing netif name 'eth2' to 'eth0':
> Device or resource busy
> ------------------------------
>
>
>
> Hello,
>
> I am new in xCat, but can't fix the issue:
>
> error changing netif name 'eth2' to 'eth0': Device or resource busy
>
>
> Please help.
>
> What I have:
>
> 1. xCAT-server-2.8.3-snap201311122316.noarch
> 2. xCAT-2.8.3-snap201311122318.x86_64
>
> My installation config:
>
> # lsdef node1
> Object name: node1
> arch=x86_64
> currstate=netboot SL6.3-x86_64-compute
> groups=all
> initrd=xcat/osimage/SL6.3-x86_64-netboot-compute/initrd-stateless.gz
> installnic=
>
> 00:21:90:2F:61:CE
> interface=eth0
> ip=172.21.22.71
> kcmdline=imgurl=
> *http://172.21.22.70:80//install/netboot/SL6.3/x86_64/compute/rootimg.gz*<http://172.21.22.70//install/netboot/SL6.3/x86_64/compute/rootimg.gz>XCAT=!myipfn!:3001
> NODE=srvmpisnb02 FC=yes ifname=eth0:00:21:90:2F:61:CE
> netdev=eth0
> kernel=xcat/osimage/SL6.3-x86_64-netboot-compute/kernel
> mac=00:25:90:2F:68:CE
> netboot=pxe
> nfsserver=172.21.22.70
> nicips.ib0=192.168.1.2
> nicnetworks.ib0=ib0
> nictypes.ib0=Infiniband
> os=SL6.3
> postbootscripts=otherpkgs,configib,mkresolvconf
> postscripts=syslog,remoteshell,syncfiles,otherpkgs,confignics
> --ibaports=1
> primarynic=00:21:90:2F:61:CE
> profile=compute
> provmethod=SL6.3-x86_64-netboot-compute
> status=booted
> statustime=12-23-2013 16:41:24
> tftpserver=172.21.22.70
> updatestatus=synced
> updatestatustime=12-23-2013 11:57:15
>
> After getting os image and unpack I see next:
>
> *COMPUTE NODE*
>
> Dec 23 16:44:13 srvmpisnb02 udevd-work[1944]: error changing netif name
> 'eth2' to 'eth0': Device or resource busy
>
>
> # ifconfig:
>
> eth2 Link encap:Ethernet HWaddr 00:21:90:2F:61:CE
> inet addr:172.21.22.71 Bcast:172.21.22.255 Mask:255.255.255.0
> inet6 addr: fe80::225:90ff:fe2f:68ce/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:89540 errors:0 dropped:0 overruns:0 frame:0
> TX packets:9722 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:126985953 (121.1 MiB) TX bytes:1012865 (989.1 KiB)
> Memory:df920000-df940000
>
> But in /etc/sysconfig/network-script I have ifcfg-eth0 only.
>
> # cat /etc/udev/rules.d/70-persistent-net.rules
>
> # PCI device 0x8086:0x1521 (igb)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{address}=="00:25:90:2f:68:cc", ATTR{type}=="1", KERNEL=="eth*",
> NAME="eth0-renamed"
>
> # PCI device 0x8086:0x1521 (igb)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{address}=="00:25:90:2f:68:cd", ATTR{type}=="1", KERNEL=="eth*",
> NAME="eth1"
>
> # PCI device 0x8086:0x1521 (igb) (custom name provided by external tool)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{address}=="00:21:90:2F:61:CE", ATTR{type}=="1", KERNEL=="eth*",
> NAME="eth0"
>
> ------------------------------------------------------------------------------
> Rapidly troubleshoot problems before they affect your business. Most IT
> organizations don't have a clear picture of how application performance
> affects their revenue. With AppDynamics, you get 100% visibility into your
> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
> Pro!
> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> Rapidly troubleshoot problems before they affect your business. Most IT
> organizations don't have a clear picture of how application performance
> affects their revenue. With AppDynamics, you get 100% visibility into your
> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
> Pro!
> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
