xCAT does not support to set installnic attribute to a real mac address. Use 'mac' key word is recommended.
Thanks Best Regards ---------------------------------------------------------------------- Wang Xiaopeng (王晓朋) IBM China System Technology Laboratory Tel: 86-10-82453455 Email: [email protected] Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District Beijing P.R.China 100193 From: Linda Mellor <[email protected]> To: xCAT Users Mailing list <[email protected]>, Date: 2014/01/01 01:30 Subject: Re: [xcat-user] error changing netif name 'eth2' to 'eth0': Device or resource busy Another thing to try, still keeping interface unset as you have it now: chdef node1 installnic=mac primarynic=mac That is the explicit text string 'mac'. I'm not sure what xCAT tries to do when you have those attrs set to actual mac values. Also, after running nodeset, first tail /var/log/messages I noticed that for me, I was not getting all nodeset error msgs displayed to the screen for some reason, but they were getting posted to syslog. Linda Inactive hide details for Dmitry Yulov ---12/23/2013 10:49:36 PM---Hello, Thanks but it didn't hel me :(Dmitry Yulov ---12/23/2013 10:49:36 PM---Hello, Thanks but it didn't hel me :( From: Dmitry Yulov <[email protected]> To: xCAT Users Mailing list <[email protected]>, Date: 12/23/2013 10:49 PM Subject: Re: [xcat-user] error changing netif name 'eth2' to 'eth0': Device or resource busy Hello, Thanks but it didn't hel me :( chdef node1 interface="" 1 object definitions have been created or modified. # lsdef node1 Object name: node1 arch=x86_64 currstate=netboot SL6.3-x86_64-compute groups=all initrd=xcat/osimage/SL6.3-x86_64-netboot-compute/initrd-stateless.gz installnic= 00:21:90:2F:61:CE ip=172.21.22.71 kcmdline=imgurl= http://172.21.22.70:80//install/netboot/SL6.3/x86_64/compute/rootimg.gz XCAT=!myipfn!:3001 NODE=node1 FC=yes ifname=eth0:00:21:90:2F:61:CE netdev=eth0 kernel=xcat/osimage/SL6.3-x86_64-netboot-compute/kernel mac=00:21:90:2F:61:CE netboot=pxe nfsserver=172.21.22.70 nicips.ib0=192.168.1.2 nicnetworks.ib0=ib0 nictypes.ib0=Infiniband os=SL6.3 postbootscripts=otherpkgs,configib,mkresolvconf postscripts=syslog,remoteshell,syncfiles,otherpkgs,confignics --ibaports=1 primarynic=00:21:90:2F:61:CE profile=compute provmethod=SL6.3-x86_64-netboot-compute status=booted statustime=12-23-2013 16:41:24 tftpserver=172.21.22.70 updatestatus=synced updatestatustime=12-23-2013 11:57:15 # nodeset node1 osimage=SL6.3-x86_64-netboot-compute # lsdef node1 Object name: node1 arch=x86_64 currstate=netboot SL6.3-x86_64-compute groups=all initrd=xcat/osimage/SL6.3-x86_64-netboot-compute/initrd-stateless.gz installnic=00:21:90:2F:61:CE ip=172.21.22.71 kcmdline=imgurl= http://172.21.22.70:80//install/netboot/SL6.3/x86_64/compute/rootimg.gz XCAT=!myipfn!:3001 NODE= node1 FC=yes ifname=00:21:90:2F:61:CE: 00:21:90:2F:61:CE netdev=00:21:90:2F:61:CE kernel=xcat/osimage/SL6.3-x86_64-netboot-compute/kernel mac= 00:21:90:2F:61:CE netboot=pxe nfsserver=172.21.22.70 nicips.ib0=192.168.1.2 nicnetworks.ib0=ib0 nictypes.ib0=Infiniband os=SL6.3 postbootscripts=otherpkgs,configib,mkresolvconf postscripts=syslog,remoteshell,syncfiles,otherpkgs,confignics --ibaports=1 primarynic= 00:21:90:2F:61:CE profile=compute provmethod=SL6.3-x86_64-netboot-compute status=booted statustime=12-23-2013 16:41:24 tftpserver=172.21.22.70 updatestatus=synced updatestatustime=12-23-2013 11:57:15 When node is booting I see on the screen: dracut: FATAL : Invalid argument for ifname= Bets Regards, -- Dmitry On 23 December 2013 23:02, Ling Gao <[email protected]> wrote: Can you make the interface blank? chdef node1interface="" or manually go to the mac table and blank out the interface attribute for node1. Then do nodeset again and redeploy the node. Hope it helps. Thanks, Ling Ling Gao Poughkeepsie Unix Development Lab IBM Systems and Technology Group Internal: T/L 293-5692 External: [email protected], 845-433-5692 "I never worry about the future. It comes soon enough." --- Albert Einstein From: Dmitry Yulov <[email protected]> To: [email protected], Date: 12/23/2013 01:47 PM Subject: [xcat-user] error changing netif name 'eth2' to 'eth0': Device or resource busy Hello, I am new in xCat, but can't fix the issue: error changing netif name 'eth2' to 'eth0': Device or resource busy Please help. What I have: 1. xCAT-server-2.8.3-snap201311122316.noarch 2. xCAT-2.8.3-snap201311122318.x86_64 My installation config: # lsdef node1 Object name: node1 arch=x86_64 currstate=netboot SL6.3-x86_64-compute groups=all initrd=xcat/osimage/SL6.3-x86_64-netboot-compute/initrd-stateless.gz installnic=00:21:90:2F:61:CE interface=eth0 ip=172.21.22.71 kcmdline=imgurl= http://172.21.22.70:80//install/netboot/SL6.3/x86_64/compute/rootimg.gz XCAT=!myipfn!:3001 NODE=srvmpisnb02 FC=yes ifname=eth0:00:21:90:2F:61:CE netdev=eth0 kernel=xcat/osimage/SL6.3-x86_64-netboot-compute/kernel mac=00:25:90:2F:68:CE netboot=pxe nfsserver=172.21.22.70 nicips.ib0=192.168.1.2 nicnetworks.ib0=ib0 nictypes.ib0=Infiniband os=SL6.3 postbootscripts=otherpkgs,configib,mkresolvconf postscripts=syslog,remoteshell,syncfiles,otherpkgs,confignics --ibaports=1 primarynic=00:21:90:2F:61:CE profile=compute provmethod=SL6.3-x86_64-netboot-compute status=booted statustime=12-23-2013 16:41:24 tftpserver=172.21.22.70 updatestatus=synced updatestatustime=12-23-2013 11:57:15 After getting os image and unpack I see next: COMPUTE NODE Dec 23 16:44:13 srvmpisnb02 udevd-work[1944]: error changing netif name 'eth2' to 'eth0': Device or resource busy # ifconfig: eth2 Link encap:Ethernet HWaddr 00:21:90:2F:61:CE inet addr:172.21.22.71 Bcast:172.21.22.255 Mask:255.255.255.0 inet6 addr: fe80::225:90ff:fe2f:68ce/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:89540 errors:0 dropped:0 overruns:0 frame:0 TX packets:9722 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:126985953 (121.1 MiB) TX bytes:1012865 (989.1 KiB) Memory:df920000-df940000 But in /etc/sysconfig/network-script I have ifcfg-eth0 only. # cat /etc/udev/rules.d/70-persistent-net.rules # PCI device 0x8086:0x1521 (igb) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR {address}=="00:25:90:2f:68:cc", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0-renamed" # PCI device 0x8086:0x1521 (igb) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR {address}=="00:25:90:2f:68:cd", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x8086:0x1521 (igb) (custom name provided by external tool) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR {address}=="00:21:90:2F:61:CE", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
